Peugeot RifterUpdated 7 min read

Peugeot Rifter I Tyre Pressure and Warning

How tyre under-inflation detection works on the Peugeot Rifter (2018-2025): checking pressures, alerts, reinitialisation and identification labels.

Peugeot Rifter (2018-2025) on a leafy autumn road with the front tyre in focus
Image adapted from a photo by Vauxford, CC BY-SA 4.0.

Hello and welcome. In this post, we'll look at tyre pressures and the under-inflation warning on the Peugeot Rifter I (2018-2025). Your Peugeot Rifter can warn you when one or more tyres lose pressure. This guide explains how the under-inflation detection system works, what to do when the alert comes on, how to reinitialise the system after adjusting the pressures, and where to find the tyre pressure label and other identification markings. Some features depend on the version or equipment fitted, such as the touch screen and the spare wheel, so not everything here may apply to your Rifter.

Where is the tyre pressure label on a Peugeot Rifter?

The tyres/paint code label is on the driver's door. It shows the unladen and laden tyre pressures, the tyre specification and the spare tyre inflation pressure.

Quick Reference

Scroll the table sideways.

SectionIn short
Tyre under-inflation detectionHow the system works and how to check pressures
Under-inflation alertWhat to do when the warning lamp comes on
ReinitialisationReset the system after adjusting pressures or changing wheels
MalfunctionWarning lamps mean monitoring has stopped, get it checked
Identification markingsWhere to find the VIN and tyre pressure label

Tyre under-inflation detection

The tyre under-inflation detection system alerts you if one or more tyres lose pressure. The alert is raised while the vehicle is moving, not when it is stationary.

Peugeot Rifter I tyre-pressure reset using the instrument-panel button or the driving menu

The system compares information from the wheel speed sensors with reference values. You must reinitialise these reference values every time you adjust the tyre pressures or change a wheel. The system uses the last values stored during reinitialisation, so the tyre pressures must be correct when you carry it out. This is your responsibility as the driver.

The system can never replace your own vigilance. You still need to check the tyre pressures regularly, including the spare wheel, especially before a long journey. Driving with under-inflated tyres, particularly with a heavy load, at high speed or on a long journey:

  • Worsens road-holding.
  • Lengthens braking distances.
  • Causes premature wear of the tyres.
  • Increases energy consumption.

You will find the inflation pressures for your vehicle on the tyre pressure label. Keep these points in mind when checking:

  • When to check: monthly, with the tyres cold (vehicle stopped for 1 hour or after a journey of less than 6 miles (10 km) at moderate speeds).
  • Warm tyres: if the tyres are not cold, add 0.3 bar to the pressures shown on the label.
  • Snow chains: you do not need to reinitialise the system after fitting or removing snow chains.
  • Spare wheel: the steel spare wheel does not have an under-inflation detection sensor.

Under-inflation alert

The under-inflation alert is shown by this warning lamp staying on, with an audible signal and, depending on equipment, a message.

  1. Slow down: reduce speed immediately, avoid excessive steering movements and avoid sudden braking.
  2. Stop: stop the vehicle as soon as it is safe to do so.
  3. Check the pressures: using a compressor, such as the one in the temporary puncture repair kit, check the pressures of all four tyres when cold.
  4. If you cannot check straight away: drive carefully at reduced speed.
  5. If you have a puncture: use the temporary puncture repair kit or the spare wheel, depending on equipment.

A loss of pressure does not always cause visible deformation of the tyre, so do not rely on a visual check alone. Driving too slowly may not ensure optimum monitoring.

The alert is not triggered immediately after a sudden loss of pressure or a tyre blow-out, because analysing the values from the wheel speed sensors can take several minutes. The alert may also be delayed at speeds below 25 mph (40 km/h), or when you are driving in a sporty way. The alert stays active until you reinitialise the system.

Reinitialisation

You must reinitialise the system after adjusting the pressure of one or more tyres, and after changing one or more wheels.

Before you start, check the pressures of all four tyres. They must be correct for how you are using the vehicle and match the values on the tyre pressure label. The system will not tell you if a pressure is wrong at the time of reinitialisation.

Without touch screen:

  1. Stop the vehicle: make sure the vehicle is stationary.
  2. Press the button: press the reinitialisation button for about 3 seconds, then release it.
  3. Listen for confirmation: an audible signal confirms the reinitialisation.

With touch screen: with the vehicle stationary, reinitialise the system through the Driving/Vehicle menu on the touch screen.

Malfunction

If the system develops a malfunction, warning lamps light up on the instrument panel. Tyre under-inflation monitoring is then no longer carried out, so have the system checked by a PEUGEOT dealer or a qualified workshop.

Using a non-standard spare wheel may also suspend tyre pressure monitoring. In this case the malfunction warning lamp comes on, and it goes off once the wheel has been replaced by one the same size as the others, the pressure has been readjusted and the system has been reinitialised.

Identification markings

Your Rifter carries several visible markings used to identify the vehicle.

Peugeot Rifter I tyre pressure label on the edge of the driver's door

Scroll the table sideways.

MarkingWhat it isWhere to find it
AVehicle Identification Number (VIN), under the bonnetStamped on the chassis, near the right-hand front wheel arch
BVehicle Identification Number (VIN), on the dashboardPrinted on an adhesive label visible through the windscreen
CManufacturer's labelAffixed to the centre pillar, left-hand or right-hand side
DTyres/paint code labelAffixed to the driver's door

The manufacturer's label (C) shows:

  • Manufacturer's name.
  • European whole vehicle type approval number.
  • Vehicle Identification Number (VIN).
  • Gross vehicle weight (GVW).
  • Gross train weight (GTW).
  • Maximum weight on the front axle.
  • Maximum weight on the rear axle.

The tyres/paint code label (D) shows:

  • Tyre pressures, unladen and laden.
  • Tyre specification, made up of the dimensions and type as well as the load and speed indices.
  • Spare tyre inflation pressure.
  • Paint colour code.

Your vehicle may have been fitted from new with tyres that have higher load and speed indices than those on the label, and this does not affect the tyre pressures (on cold tyres). If you want to change the type of tyres, contact a PEUGEOT dealer for the tyre fits approved for your vehicle.

Frequently Asked Questions

Where is the tyre pressure label on a Peugeot Rifter?

The tyres/paint code label is on the driver's door. It shows the unladen and laden tyre pressures, the tyre specification and the spare tyre inflation pressure.

How do I reset the tyre pressure warning on my Peugeot Rifter?

With the vehicle stationary, press the reinitialisation button for about 3 seconds and wait for the audible signal, or use the Driving/Vehicle touch screen menu if your car has a touch screen. Check all four tyre pressures first, because the system will not tell you if one is wrong.

Why is the tyre pressure light still on after I pumped up the tyres?

The alert stays active until you reinitialise the system. You must reinitialise it after any adjustment to the tyre pressures or after changing a wheel.

Do I need to reset the tyre pressure system after fitting snow chains?

No, the system does not have to be reinitialised after fitting or removing snow chains.

The under-inflation detection system is a useful extra, but it works best alongside your own monthly pressure checks on cold tyres. Keep the values on the driver's door label in mind, reinitialise the system every time you adjust the pressures, and your Rifter will warn you properly if a tyre starts to lose air.

More Peugeot Rifter Guides

To find out what other lamps on your instrument panel mean, read our guides to the Peugeot Rifter orange warning lights, the Peugeot Rifter red warning lights and the Peugeot Rifter green and blue indicator lamps.

Don't forget to follow us on Instagram for more Peugeot guides!

This is an independent guide, not an official Peugeot publication. If in doubt, contact a PEUGEOT dealer or a qualified workshop before carrying out any work.

Related guides: Peugeot Rifter model guides.

Cover adapted from a photograph by Vauxford — Wikimedia Commons, CC BY-SA 4.0 (AI edited).

Related guides

Guide ·

Peugeot Rifter I Spare Wheel and Tyre Repair Kit

Hello and welcome. In this post, we'll look at what to do when you get a flat tyre on your Peugeot Rifter. We cover where the tools are kept, how to use the temporary puncture repair kit and how to fi

Guide ·

Peugeot Rifter I Bulb Replacement

Hello and welcome. In this post, we'll look at how to change the bulbs on the Peugeot Rifter I (2018-2025). It covers the safety precautions, the different types of bulb fitted, and the steps for the

Guide ·

Peugeot Rifter I Battery Location and Jump Starting

Hello and welcome. In this post, we'll look at where the 12 V battery is, and how to jump start or charge it on the Peugeot Rifter I (2018-2025). It covers where to find the battery, how to start the