What every green and blue warning lamp on your Peugeot RCZ I means, from indicators and headlamps to directional headlamp faults, and what you should do.
Green and blue lamps on your instrument panel are mostly status indicators. They tell you that a system, such as your indicators or headlamps, is switched on and working. One of them can also flash to warn you about a fault. Some lamps come on with an audible signal or a message on the screen to help you understand what is happening.
This guide covers the Peugeot RCZ I produced from 1 February 2015 onwards, based on handbook edition ed01-15. Some lamps and messages depend on your version, equipment and type of instrument panel, so you may not see every lamp listed here.
Scroll the table sideways.
| Warning | Urgency | In short |
|---|---|---|
| Directional headlamps | Get it checked soon | Flashing: directional headlamps system fault |
| Left-hand direction indicator | Information / status | Left indicator is on |
| Right-hand direction indicator | Information / status | Right indicator is on |
| Hazard warning lamps | Information / status | Hazard warning lamps are switched on |
| Sidelamps | Information / status | Sidelamps are on |
| Dipped beam headlamps | Information / status | Dipped beam headlamps are on |
| Main beam headlamps | Action needed from you | Main beam on, switch back when needed |
This lamp shows the directional headlamps symbol. When it flashes, it means there is a fault with the directional headlamps system.
What to do:
This lamp shows an arrow pointing to the left. It flashes, along with a buzzer, when you push the lighting stalk down to signal left.
What to do:
This lamp shows an arrow pointing to the right. It flashes, along with a buzzer, when you push the lighting stalk up to signal right.
What to do:
This lamp shows the hazard warning symbol. It flashes, with an audible signal, when you press the hazard warning lamps switch on the dashboard.
What to do:
This lamp shows the sidelamps symbol. It stays on steadily when the lighting stalk is in the "Sidelamps" position, or in the "AUTO" position when the light outside is low.
What to do:
This lamp shows the dipped beam headlamps symbol. It stays on steadily when the lighting stalk is in the "Dipped beam headlamps" position, or in the "AUTO" position when the light outside is low.
What to do:
This lamp shows the main beam headlamps symbol. It stays on steadily when you pull the lighting stalk towards you to switch on main beam.
What to do:
If a lamp comes on and you are not sure what it means, check the message shown on the screen alongside it, as this is there to help you identify the issue. If you are still unsure or think something is wrong, contact a PEUGEOT dealer or a qualified workshop.
Most green and blue lamps on your Peugeot RCZ I are simply there to confirm that your lights or indicators are working as you expect. The one to watch is the flashing directional headlamps lamp, which means you should have the system checked.
Related guides: Peugeot RCZ I (2015-present) red warning lights, Peugeot RCZ I (2015-present) orange warning lights and all Peugeot RCZ guides.
A red warning lamp on your instrument panel means something needs your attention. It may point to a serious fault, or it may be telling you to do something, such as fastening a seat belt or releasing the parking...
Orange lamps on your instrument panel either warn you about a fault or tell you that a system is working or has been switched off on purpose. Some come on for a few seconds when you switch on the ignition and...
Green and blue lamps on your instrument panel usually confirm that a system is working, such as your indicators or headlamps. They can also be accompanied by an audible signal, a symbol and a message on the screen,...