Peugeot RCZ I green and blue warning lamps explained: what each indicator means, from direction indicators to main beam, and what you should do.
Green and blue lamps on your instrument panel usually confirm that a system is working, such as your indicators or headlamps. They can also be accompanied by an audible signal, a symbol and a message on the screen, depending on your instrument panel.
This guide covers the Peugeot RCZ I (2009-2015) and is based on handbook edition ed02-13, which applies to cars produced from 1 October 2013. Some lamps depend on your car's version or equipment, so you may not see all of them.
Scroll the table sideways.
| Warning | Urgency | In short |
|---|---|---|
| Directional headlamps | Get it checked soon | Flashing: directional headlamps system fault |
| Left-hand direction indicato r | Information / status | Left indicator is on |
| Right-hand direction indicator | Information / status | Right indicator is on |
| Hazard warning lamps | Information / status | Hazard warning lamps are switched on |
| Sidelamps | Information / status | Sidelamps are on |
| Dipped beam headlamps | Information / status | Dipped beam headlamps are on |
| Main beam headlamps | Information / status | Main beam headlamps are on |
This lamp shows the directional headlamps symbol. If it flashes, there is a fault with the directional headlamps system.
What to do:
This lamp shows a left-pointing arrow. It flashes, with a buzzer, when you push the lighting stalk down to signal left.
What to do:
This lamp shows a right-pointing arrow. It flashes, with a buzzer, when you push the lighting stalk up to signal right.
What to do:
This shows the hazard warning symbol. It flashes, with an audible signal, when the hazard warning lamps switch on the dashboard has been pressed.
What to do:
This lamp shows the sidelamps symbol. It stays on steadily when the lighting stalk is in the "Sidelamps" position, or in the "AUTO" position when the light is low.
What to do:
This lamp shows the dipped beam symbol. It stays on steadily when the lighting stalk is in the "Dipped beam headlamps" position, or in the "AUTO" position when the light is low.
What to do:
This lamp shows the main beam symbol. It stays on steadily when you have pulled the lighting stalk towards you to switch on main beam.
What to do:
Each of these lamps comes with a message on the screen to help you work out what is happening. If a lamp behaves in a way you don't expect, or you are unsure what it means, contact a PEUGEOT dealer or a qualified workshop for advice.
Most green and blue lamps on your RCZ simply confirm that a system is doing its job. The one to watch is a flashing directional headlamps lamp, which points to a fault you should have checked.
Related guides: Peugeot RCZ I (2009-2015) red warning lights, Peugeot RCZ I (2009-2015) orange warning lights and all Peugeot RCZ guides.
A red warning lamp on your instrument panel means something needs your attention. It may point to a serious fault, or it may be telling you to do something, such as fastening a seat belt or releasing the parking...
Orange lamps on your instrument panel either warn you about a fault or tell you that a system is working or has been switched off on purpose. Some come on for a few seconds when you switch on the ignition and...
A red warning lamp on your Peugeot RCZ points to a fault that needs your attention. In some cases you will need to stop the car as soon as it is safe to do so. When one of these lamps comes on, you may also hear a...