Where to find the fuse boxes on the Peugeot Partner Tepee II (2017-present), how to change a fuse and what each dashboard and underbonnet fuse does.
Hello and welcome. In this post we look at the fuse boxes on the Peugeot Partner Tepee II (2017-present). We cover where the dashboard, underbonnet and additional fuse boxes are, how a fuse is changed and what each fuse protects.
Scroll the table sideways.
| Section | In short |
|---|---|
| Changing a fuse | Where the fuse boxes are and the tweezers |
| Removing and fitting a fuse | Fix the cause first, use the same rating |
| Dashboard fuses | Dashboard fuse numbers, ratings and functions |
| Towing/towbar/converter/coachbuilder/platform cab fuses | Additional box fuses for towing and conversions |
| Underbonnet fuses | Underbonnet fuse numbers, ratings and functions |
Your Partner Tepee has two main fuse boxes:
If your vehicle has one, an additional fuse box is provided for towing, the towbar and the connections for body and platform cab conversions. You will find it on the right-hand side, behind the load stop partition.
The information in this guide only covers the fuses you can change yourself, using the tweezers located behind the dashboard storage compartment on the right-hand side. For any other work, visit a PEUGEOT dealer or a qualified workshop. Professional repairers can get complete information on the fuses and relays from the wiring information and diagrams available through the dealer network.
A good fuse has an intact metal strip; a failed fuse has a broken strip.
Be careful with accessories. PEUGEOT accepts no responsibility for repair costs or malfunctions caused by fitting accessories that are not supplied or recommended by PEUGEOT, or not installed to the specifications. This applies in particular when the combined power consumption of all the additional equipment connected exceeds 10 milliamperes.
Tilt the cover to reach the fuses in the dashboard fuse box.
Scroll the table sideways.
| Fuse | Amps | Allocation |
|---|---|---|
| 1 | 15 | Rear wiper |
| 2 | - or 30 | Free or Central locking |
| 3 | 5 | Airbags |
| 4 | 10 | Air conditioning, diagnostic socket, rear view mirror control, headlamp beam |
| 5 | 30 | Window controls |
| 6 | 30 | Locks |
| 7 | 5 | Rear courtesy lamp, front map reading lamps, ceiling lamp |
| 8 | 20 | Audio system, display screen, under-inflation detection, alarm and siren |
| 9 | 30 | Front and rear 12 V socket |
| 10 | 15 | Centre console |
| 11 | 15 | Low current anti-theft |
| 12 | 15 | Rain and sunshine sensor, airbags |
| 13 | 5 | Instrument panel |
| 14 | 15 | Parking sensors, automatic air conditioning controls, Hands-free kit |
| 15 | 30 | Locks |
| 16 | - | Free |
| 17 | 40 | Rear screen/rear view mirrors defrosting |
The following two tables cover the additional fuse box behind the load stop partition.
Scroll the table sideways.
| Fuse | Amps | Allocation |
|---|---|---|
| 1 | - | Free |
| 2 | 20 | Heated seats |
| 3 | - | Free |
| 4 | 15 | Folding rear view mirror relays |
| 5 | 15 | Refrigeration equipment socket relay |
Scroll the table sideways.
| Fuse | Amps | Allocation |
|---|---|---|
| 1 | 15 | Free |
| 2 | 15 | Ignition relay, optional generator |
| 3 | 15 | 12 V trailer power supply |
| 4 | 15 | Continuous power supply for converters/coachbuilders |
| 5 | 40 | Hazard warning lamps |
These designations are only a guide. This box also depends on the converter or coachbuilder, so contact the converter or coachbuilder for technical support for their equipment.
Open the bonnet, then unclip and tilt the fuse box to reach the fuses.
Scroll the table sideways.
| Fuse | Amps | Allocation |
|---|---|---|
| 1 | 20 | Engine management |
| 2 | 15 | Audible warning |
| 3 | 10 | Front and rear screenwash pump |
| 4 | - or 20 | Free or LED |
| 5 | 15 | Engine components |
| 6 | 10 | Steering wheel angle sensor, ESC |
| 7 | 10 | Brake switch, clutch switch |
| 8 | 25 | Starter |
| 9 | 10 | Headlamp adjustment motor, vehicle data recording control unit |
| 10 | 30 | Engine components |
| 11 | 40 | Free |
| 12 | 30 | Wipers |
| 13 | 40 | Built-in systems interface |
| 14 | 30 | Pump |
| 15 | 10 | Right-hand main beam headlamp |
| 16 | 10 | Left-hand main beam headlamp |
| 17 | 15 | Right-hand dipped beam headlamp |
| 18 | 15 | Left-hand dipped beam headlamp |
There is one in the lower dashboard on the left-hand side, behind the cover, and another under the bonnet near the battery. Some vehicles also have an additional box on the right-hand side behind the load stop partition.
Fuse 9 in the dashboard fuse box, rated 30 A, covers the front and rear 12 V socket.
The tweezers are behind the dashboard storage compartment on the right-hand side.
No. Always replace a faulty fuse with a fuse of the same rating, and find and fix the cause of the fault first.
A blown fuse is often a quick fix, as long as you find the cause first and fit a fuse of the same rating. If a fuse keeps failing, or the job goes beyond the fuses covered here, take your Partner Tepee to a PEUGEOT dealer or a qualified workshop.
If a warning lamp comes on after a fuse problem, check our guides to the Peugeot Partner Tepee red warning lights, Peugeot Partner Tepee orange warning lights and Peugeot Partner Tepee green and blue indicator lamps.
Don't forget to follow us on Instagram for more Peugeot guides!
This is an independent guide, not an official Peugeot publication. Check your vehicle’s own manual before carrying out any work.
Related guides: Peugeot Partner Tepee model guides.
Cover adapted from a photograph by Dorieo — Wikimedia Commons, CC BY-SA 4.0 (AI edited).
Hello and welcome. In this post we cover the 12 V battery on the Peugeot Partner Tepee II (2017-present). We look at locking and unlocking the doors by hand when the battery is flat, charging it with
Hello and welcome. In this post we cover tyre under-inflation detection on the Peugeot Partner Tepee II (2017-present). We look at the two detection systems, what to do when the alert comes on, reinit
