Peugeot 408 Indicators: Red Warnings
A guide to every red warning light on the Peugeot 408, including STOP, traction battery, coolant, oil pressure and braking, with what to do.
A red warning lamp on your Peugeot 408's instrument panel means one thing: deal with it now. Some red lamps mean you should stop as soon as it's safe; others, like an unfastened seat belt or an open door, just need fixing before you carry on. This guide covers every red warning for the 408 fastback (2022 on), using the official Peugeot 408 owner's handbook as our reference.
Because the 408 is sold as a petrol, mild hybrid, plug-in hybrid and electric car, you'll find hybrid- and battery-specific lamps below that won't appear on every car.
Start with the quick-reference table, then scroll to the lamp you're seeing for the details.
Quick Reference
Scroll the table sideways.
| Warning | Urgency | In short |
|---|---|---|
| STOP Warning | Stop safely, get help | Serious fault: stop as soon as it is safe |
| Traction Battery Overheating (Plug-in Hybrid) | Stop safely, get help | Traction battery overheating: get out of the car |
| Maximum Coolant Temperature | Stop safely, get help | Engine overheating |
| Engine Oil Pressure | Stop safely, get help | Loss of oil pressure |
| System Fault | Stop safely, get help | Hybrid or electric drive system fault |
| 12 V Battery Charge | Stop safely, get help | 12 V charging fault |
| Braking | Stop safely, get help | Brake fluid low or EBFD fault |
| Traction Battery Fault (Plug-in Hybrid) | Get it checked soon | Traction battery fault |
| Power Steering | Get it checked soon | Power steering fault |
| Electric Parking Brake | Action needed from you | Electric parking brake on or faulty |
| Door(s) Open | Action needed from you | A door, the boot or bonnet is open |
| Seat Belt(s) Not Fastened / Unfastened | Action needed from you | Seat belt not fastened |
| Charging Cable Connected (Plug-in Hybrid) | Information / status | Charging cable still plugged in |
STOP Warning
![]()
A red triangle with an exclamation mark is the most serious warning on the dashboard. It never comes on by itself: it always appears with another warning lamp, a message on the display and a chime. The other lamp tells you which system is affected: the engine, brakes, power steering, automatic gearbox, or a major electrical fault.
What to do:
- Slow down and pull over as soon as it's safe. On a motorway, use the next exit or services if you can reach them safely. Otherwise stop on the hard shoulder (or the shoulder in the US) as a last resort
- Switch off the engine and don't try to drive on
- Read the message and note the second warning lamp, then call Peugeot Assistance or your breakdown provider (AA, RAC, Green Flag or AAA, for example)
Expect the car to be recovered on a truck rather than driven to the workshop.
Traction Battery Overheating (Plug-in Hybrid)
![]()
This lamp comes on together with the STOP warning, a message and a chime when the high-voltage traction battery is too hot. It's one of the few warnings where Peugeot tells you to get everyone out of the car.
What to do:
- Stop as quickly as you safely can and switch off
- Get all passengers out and move well away from the car, somewhere safe away from traffic
- Call the emergency services if you see smoke or smell burning, then call Peugeot Assistance
Maximum Coolant Temperature
![]()
This warning means the cooling system is too hot. Depending on your instrument panel, you'll see either a thermometer symbol or the temperature gauge blocks turning red. Common causes are low coolant (often from a leak), a failed cooling fan or a radiator problem.
What to do:
- Pull over safely and switch off the engine
- Wait until the engine has cooled down completely. This can take an hour or more
- Then check the coolant level in the expansion tank and top up to the MAX mark if needed
- If the warning comes back, don't keep driving. Have the car checked
Safety first: never open the coolant cap while the engine is hot. The system is under pressure and can spray scalding coolant.
Engine Oil Pressure
![]()
The red oil can means a fault in the engine's lubrication system: the oil pressure is too low to protect the engine. This isn't the same as a routine "top up soon" reminder. Without oil pressure, serious engine damage can happen within minutes.
What to do:
- Stop as soon as it's safe and switch off the engine immediately
- Once the car has stood for a few minutes on level ground, check the dipstick. Low oil may be the cause, but topping up doesn't fix a pressure fault
- Don't drive on. Call for assistance and have the car taken to a workshop
System Fault
![]()
On hybrid, plug-in hybrid and electric versions, this lamp signals a fault in the electric drive system, either the electric motor or the traction (high-voltage) battery.
What to do:
- Stop safely, switch off and don't continue your journey
- Contact a Peugeot dealer or a workshop qualified to work on high-voltage systems
- Don't attempt any checks or repairs yourself. High-voltage components are dangerous to touch
12 V Battery Charge
![]()
This warning concerns the ordinary 12-volt battery and its charging circuit, not the high-voltage battery on electrified models. Typical causes are dirty or loose battery terminals, or a slack or broken alternator belt. If it's left, the battery will go flat and the car will lose electrical power.
What to do:
- Stop safely
- If the electric parking brake stops working, secure the car: engage a gear (manual), select P (EAT6), or chock a wheel (EAT8 or drive selector, depending on version)
- If you're comfortable doing so, check that the battery terminals are clean and tight
- If the lamp is still on after restarting, contact a dealer or workshop
Braking
![]()
The red brake symbol has two possible causes, according to the handbook:
- Brake fluid level has dropped significantly, often because of a leak or badly worn pads
- Electronic brake force distribution (EBFD) fault. On some versions this shows as the brake lamp together with the ABS lamp
What to do:
- Stop safely. Braking performance may be reduced
- If it's a fluid problem, top up with fluid that meets Peugeot's specification (it's listed in your handbook), but have the car checked before relying on the brakes
- For an EBFD fault, or if the warning returns, don't drive on. Call for assistance
On some newer models (for example the 308), the brake lamp can also signal a minor braking fault. In that case drive carefully and have it checked soon. The message on the display tells you which applies.
Traction Battery Fault (Plug-in Hybrid)
![]()
Shown together with the Service warning lamp and a message, this means a fault has been detected in the traction battery. Unlike the overheating warning, the handbook doesn't tell you to stop immediately, but it does say you should contact a dealer.
What to do:
- Contact a Peugeot dealer or qualified workshop as soon as possible
- If you notice loss of power or anything unusual, stop safely and call for assistance instead of driving on
Power Steering
![]()
A power steering fault doesn't mean you lose steering, but it can make the steering much heavier, especially at parking speeds.
What to do:
- Drive carefully at moderate speed. Allow more effort for tight turns and roundabouts
- Have the car checked by a dealer or workshop as soon as possible
If it comes on together with the STOP warning, treat it as serious: stop and call for assistance.
Electric Parking Brake
![]()
Scroll the table sideways.
| Lamp | Meaning |
|---|---|
| Steady | The electric parking brake is applied, which is normal when parked |
| Flashing | The brake isn't applying or releasing properly |
If it's flashing:
- Park on level ground
- Engage a gear (manual) or select P (automatic or drive selector)
- Switch off the ignition and contact a Peugeot dealer or workshop
Door(s) Open
![]()
A message shows which opening isn't properly shut: a door, the boot/tailgate or, on some models, the bonnet. Above about 6 mph (10 km/h) a chime is added so you can't miss it.
What to do:
- Pull over somewhere safe
- Close the opening shown on the display firmly
- If everything is closed but the warning stays on, a door or boot switch may be faulty. Have it checked, because it can also affect locking and the alarm
Seat Belt(s) Not Fastened / Unfastened
![]()
This lamp comes on, or flashes, with an increasingly loud chime when a seat belt hasn't been fastened or has been unbuckled on the move. Many versions also show which seat is affected.
What to do:
- Make sure everyone is buckled up. If someone needs to sort out a belt, stop safely first
- If the warning stays on with nobody in a seat, check that nothing heavy (a bag, for example) is on the seat cushion
Charging Cable Connected (Plug-in Hybrid)
![]()
On plug-in hybrid and electric versions, this lamp comes on when you switch on the ignition with the charging cable still connected. If a message also appears, it's telling you that the car can't be driven until the cable is removed. This is a deliberate safety lock, not a fault.
What to do:
- Unplug the charging cable from the car
- Close the charging flap. The lamp should go out and the car will be ready to drive
If You're Not Sure
- Read the message. The text that appears with a lamp on the 408's display usually tells you exactly which system is affected
- Note what else is lit. Several warnings change meaning when they appear together with STOP or Service
- Photograph the dashboard before you switch off. It helps the dealer or your breakdown service diagnose the fault
- When in doubt, stop safely and call for help. It costs far less than a damaged engine or a collision
More Peugeot 408 Guides
See our orange warning lights, green and blue indicator lamps and what every 408 warning light means. For the bigger picture, read our Peugeot 408 review.
Don't forget to follow us on Instagram for more Peugeot guides!
Related guides
The 408 uses Peugeot's latest i-Cockpit layout: a compact steering wheel, a digital instrument panel that sits above it and a 10-inch touchscreen with i-Toggle shortcuts. This guide helps you get the most from it, from...
On the 408, the warning lamps get all the attention, but the service, oil, temperature and hybrid readouts on the digital panel are just as useful. They give you early notice of what the car needs, so you can book a...
Not every lamp on your Peugeot 408's dashboard is a warning. Green, blue and white/grey symbols mostly confirm that something is switched on: your lights, a driver assistance system or a hybrid feature. Knowing them...
Orange (amber) warning lamps on a Peugeot 408 rarely mean you have to stop immediately, but they shouldn't be ignored. Most tell you that a system has developed a fault, has switched itself off or needs some attention...
Most car buyers find the plug-in hybrid label confusing. Is it an electric car? Do you have to plug it in? With the Peugeot 408, the answers are "partly" and "you should". The two plug-in versions, the Hybrid 180 and...
The Peugeot 408 is hard to categorise: part fastback saloon, part crossover. Its engine range is just as varied, with conventional petrol, a 48-volt hybrid, two kinds of plug-in hybrid and, more recently, the fully...
Please note: the specifications and equipment in this guide reflect the 2023-2024 Peugeot 408. Engine options and trims have changed since, so use this as background rather than a current price-list reference. Is it a...