
This is the dipped beam indicator lamp on your instrument panel. It stays on when the lighting stalk is in the "Dipped beam headlamps" position, or in the "AUTO" position when the light is low.
What to do:
- No action is needed. The lamp simply confirms that your dipped beam headlamps are on.
Main beam headlamps

This is the main beam indicator lamp on your instrument panel. It stays on when you have pulled the lighting stalk towards you.
What to do:
- Pull the lighting stalk towards you again to go back to dipped beam headlamps.
Front foglamps

This is the front foglamps indicator lamp on your instrument panel. It stays on while the front foglamps are switched on.
What to do:
- To switch the front foglamps off, turn the ring on the lighting stalk rearwards twice.
Stop & Start

This is the Stop & Start indicator lamp on your instrument panel. If it flashes for a few seconds and then goes off, either STOP mode is temporarily unavailable or START mode has been triggered automatically.
What to do:
- For details of the special cases with STOP mode and START mode, see the "Stop & Start" section of your handbook.
If You're Not Sure
If a lamp comes on and you are not sure what it means, check the message shown on your instrument panel screen, as it will help you identify what is happening. If you are still unsure or think something is wrong, contact a PEUGEOT dealer or a qualified workshop.
Green and blue lamps are usually just confirming that something you have switched on is working. Get to know them and you will spot quickly when one behaves differently, such as the directional headlamps lamp flashing to show a fault.
Related guides: Peugeot 308 I CC (2008-present) red warning lights, Peugeot 308 I CC (2008-present) orange warning lights, Peugeot 308 Warning Lamps: Blue and Green Warnings (general guide) and all Peugeot 308 guides.