
This symbol is the seat belt reminder. It stays on or flashes, with an audible signal that gets louder, when a seat belt has not been fastened or has been unfastened.
What to do:
- Fasten your seat belt and make sure your passengers fasten theirs.
Manual parking brake

This symbol is the parking brake warning light. When it stays on, the parking brake is applied or has not been fully released.
What to do:
- Release the parking brake fully before you drive off.
Electric parking brake

This symbol is the electric parking brake warning light. When it stays on, the electric parking brake is applied. When it flashes, applying or releasing the brake is not working properly.
What to do:
If the light is steady:
- Release the electric parking brake before you drive off.
If the light is flashing:
- Park on flat, level ground.
- Engage a gear with a manual gearbox, or select P with an automatic gearbox or drive selector.
- Switch off the ignition and have the car checked by a dealer or a qualified workshop.
Braking

This symbol is the braking warning light. When it stays on, either the brake fluid level in the braking circuit has dropped significantly or the electronic brake force distribution (EBFD) system is faulty.
What to do:
If the brake fluid level has dropped:
- Stop somewhere safe as soon as you can.
- Top up the brake fluid with fluid that complies with the manufacturer's recommendations.
- If the problem persists, have the car checked by a dealer or a qualified workshop.
If the EBFD system is faulty:
- Stop somewhere safe as soon as you can.
- Have the car checked by a dealer or a qualified workshop.
Low fuel level (MHEV)

This symbol is the low fuel warning light. It stays on with an audible signal, with the blocks lit red on the matrix instrument panel or with the reserve level shown in red on other instrument panels, to tell you the fuel level is low.
What to do:
- Fill up with fuel as soon as you can.
Engine Coolant Temperature Warning Light


These symbols relate to the engine coolant temperature gauge. With the engine running, zone A means the temperature is correct and zone B means it is too high. In zone B, the coolant temperature warning light and the STOP warning light come on in red, with a message and an audible signal.
What to do:
- Stop the car as soon as it is safe to do so.
- Wait a few minutes before switching off the engine.
- After switching off the ignition, carefully open the bonnet and check the coolant level.
Low oil level

This symbol relates to the engine oil level. A low level is shown by "OIL" or the message "Oil level incorrect", depending on the instrument panel, together with the Service warning light and an audible signal.
What to do:
- Check the engine oil level using the dipstick.
- If the check confirms the level is low, top up the engine oil to avoid damage to the engine.
If You're Not Sure
If you are not sure what a red light means, stay calm, stop somewhere safe and check the message on the instrument panel. If a red light stays on, there may be a fault that needs further investigation, so have the car checked by a dealer or a qualified workshop.
Red warning lights on your Peugeot 2008 are there to protect you and your car, so never ignore them. For more detail on a particular system, have a look at the matching section of your handbook.
Related guides: Peugeot 2008 II (2025-present) orange warning lights, Peugeot 2008 II (2025-present) green and blue lights, Peugeot 2008 Indicators: Red Warnings (general guide) and all Peugeot 2008 guides.