Peugeot 2008 II Indicators: Green and Blue Warnings (2025-present)

Green and blue lamps on your instrument panel are the friendly ones. They tell you that a system or function is switched on or working as it should, so they are there for information rather than to warn you of a fault.

This guide covers the Peugeot 2008 II from 2025 onwards, based on handbook edition ed05-25 for vehicles produced from 02/05/2025. Some of these lamps depend on the version or equipment of your car, so you may not see all of them.

Quick Reference

Stop & Start (MHEV)

This lamp shows the Stop & Start symbol. It stays on steadily when the vehicle stops and the Stop & Start system puts the engine into STOP mode. A time counter works out how long you spend in STOP mode during a journey, and it resets each time you switch on the ignition.

What to do:

• Nothing is needed. This simply confirms that the engine is in STOP mode while you are stopped.

Vehicle ready to drive (BEV)

This lamp shows the ready to drive symbol on electric versions. When it comes on steadily with an audible signal, the vehicle is ready to drive and the thermal comfort systems are available. It goes out once you reach about 3 mph (5 km/h) and comes back on when the vehicle stops moving.

What to do:

If the lamp is on steadily with an audible signal:

• The vehicle is ready, so you can set off when you are ready.

If the lamp goes out as you move off and comes back on when you stop:

• The lamp goes out once you switch off the motor and get out of the vehicle.

Lane positioning assist

This lamp shows the lane positioning assist symbol. When it is on steadily, the function has been activated and all the conditions have been met, so the system is operating.

What to do:

• Nothing is needed. For more details on how the system works, see the Driving section of your handbook.

Automatic wiping

This lamp shows the automatic wiping symbol. When it is on steadily, automatic windscreen wiping is activated.

What to do:

• Nothing is needed. This confirms that automatic wiping is switched on.

Direction indicators

This lamp shows the direction indicator arrows. It flashes with an audible signal when your direction indicators are on.

What to do:

• Remember to switch the indicators off once you have finished your manoeuvre.

Sidelights

This lamp shows the sidelights symbol. When it is on steadily, your sidelights are on.

What to do:

• Nothing is needed. This confirms that the sidelights are switched on.

Dipped beam headlights

This lamp shows the dipped beam symbol. When it is on steadily, your dipped beam headlights are on.

What to do:

• Nothing is needed. This confirms that the dipped beam headlights are switched on.

Automatic headlight dipping

This lamp shows the automatic headlight dipping symbol. When it is on steadily, the function has been activated through the touch screen and the ring on the lighting control stalk is in the "AUTO" position.

What to do:

• Nothing is needed. For more details, see the Lighting and visibility section of your handbook.

Main beam headlights

This lamp shows the main beam symbol. When it is on steadily, your main beam headlights are on.

What to do:

• Nothing is needed. This confirms that the main beam headlights are switched on.

If You're Not Sure

A lamp coming on may also be accompanied by an audible signal or a message on a screen. Look at what else your car is telling you along with the lamp, as this helps you tell whether everything is normal. For more information on any system or function, see the matching section of your handbook.

Green and blue lamps are simply your Peugeot 2008 keeping you informed, so there is usually nothing to worry about. If you also see a red or orange lamp, check our guides to those colours to find out what it means and what you should do.

Related guides: Peugeot 2008 II (2025-present) red warning lights, Peugeot 2008 II (2025-present) orange warning lights, Peugeot 2008 Warning Lamps: Blue and Green Warnings (general guide) and all Peugeot 2008 guides.