Peugeot 2008 I Indicators: Green and Blue Warnings (2013-2015)

Green and blue lamps on your instrument panel are operation indicators. When one comes on, it confirms that the matching system has been switched on, so in most cases they are simply there to keep you informed.

This guide covers the first-generation Peugeot 2008 (2013-2015) and is based on handbook edition ed01-14, which applies to vehicles produced from 1 May 2014. Some lamps depend on your car's version or equipment, so you may not see all of them.

Quick Reference

Left-hand direction indicator

This lamp shows the left-hand direction indicator symbol. It flashes with a buzzer when you push the lighting stalk down.

What to do:

• The flashing lamp and buzzer show that the lighting stalk is pushed down for the left-hand indicator.

Right-hand direction indicator

This lamp shows the right-hand direction indicator symbol. It flashes with a buzzer when you push the lighting stalk up.

What to do:

• The flashing lamp and buzzer show that the lighting stalk is pushed up for the right-hand indicator.

Sidelamps

This lamp shows the sidelamps symbol. It stays on steadily when the lighting stalk is set to the "Sidelamps" position.

What to do:

• The steady lamp shows that the lighting stalk is in the "Sidelamps" position.

Dipped beam headlamps

This lamp shows the dipped beam headlamps symbol. It stays on steadily when the lighting stalk is set to the "Dipped beam headlamps" position.

What to do:

• The steady lamp shows that the lighting stalk is in the "Dipped beam headlamps" position.

Main beam headlamps

This lamp shows the main beam headlamps symbol. It stays on steadily when you have pulled the lighting stalk towards you to switch on main beam.

What to do:

• To go back to dipped beam headlamps, pull the lighting stalk towards you again.

Front foglamps

This lamp shows the front foglamps symbol. It stays on steadily when you have switched on the front foglamps using the ring on the lighting control stalk.

What to do:

• To switch off the front foglamps, turn the ring on the lighting control stalk rearwards twice.

Automatic wiping

This lamp shows the automatic wiping symbol. It stays on steadily when you have pushed the wiper control downwards, which means automatic front wiping is activated.

What to do:

• To switch off automatic wiping, push the wiper control stalk downwards again or move it to another position.

Stop & Start

This lamp shows the Stop & Start symbol. It can stay on steadily or flash for a few seconds, and each tells you something different.

When it stays on steadily, the Stop & Start system has put the engine into STOP mode because the car has stopped, for example at red lights or in a traffic jam.

When it flashes for a few seconds and then goes off, either STOP mode is temporarily unavailable or START mode has been triggered automatically.

What to do:

If the lamp stays on steadily:

• As soon as you want to move off, the engine restarts automatically in START mode and the lamp goes off.

If the lamp flashes for a few seconds, then goes off:

• For special cases with STOP mode and START mode, see the "Stop & Start" section of your handbook.

If You're Not Sure

If a lamp comes on and you are not sure why, check the message shown on the screen alongside it. If you run into any problems, contact a PEUGEOT dealer or a qualified workshop.

Green and blue lamps are mostly good news: they confirm that a system you have selected is working. Get to know them and you will spot quickly when something on your Peugeot 2008 has been switched on.

Related guides: Peugeot 2008 I (2013-2015) red warning lights, Peugeot 2008 I (2013-2015) orange warning lights, Peugeot 2008 Warning Lamps: Blue and Green Warnings (general guide) and all Peugeot 2008 guides.