
This lamp shows the main beam headlamps symbol. When it stays on, you have pulled the lighting stalk towards you and the main beam headlamps are on.
What to do:
- Pull the lighting stalk again to switch back to dipped beam headlamps.
Front foglamps
This lamp shows the front foglamps symbol. When it stays on, you have switched on the front foglamps using the ring on the lighting control stalk.
What to do:
- To switch the front foglamps off, turn the ring on the lighting control stalk backwards once.
Cruise control
This lamp shows the cruise control symbol. When it stays on, the cruise control has been activated.
What to do:
- Press the "ON/OFF" button to switch the cruise control on or off.
Stop & Start system (Auto Stop & Go)
This lamp shows the Stop & Start (Auto Stop & Go) symbol. It can light up in two ways.
If it stays on, the car has stopped (at red lights, in traffic jams and so on) and the Stop & Start (AS&G) system has put the engine into STOP mode.
If it flashes for a few seconds and then goes off, STOP mode is temporarily unavailable.
What to do:
If the lamp stays on:
- Simply move off when you are ready. The lamp goes off and the engine restarts automatically in START mode.
If the lamp flashes for a few seconds, then goes off:
- See the Stop & Start (Auto Stop & Go) section of your handbook for more on the system, especially the special cases for STOP mode and START mode.
If You're Not Sure
If a lamp behaves in a way you don't expect, or you have any problem with one of these systems, contact a PEUGEOT dealer or a qualified workshop.
Green and blue lamps are mostly good news, as they simply confirm that a system is doing its job. Getting to know them means you'll spot straight away when something isn't quite right.
Related guides: Peugeot 4008 I (2011-present) red warning lights, Peugeot 4008 I (2011-present) orange warning lights and all Peugeot 4008 guides.