Peugeot 308Updated 9 min read

Peugeot 308 II Service Indicator Reset and Gauges

How to read the service indicator, oil level, coolant temperature and AdBlue range gauges on the Peugeot 308 II, and how to reset the service spanner.

Peugeot 308 (2015-present) on a misty country road at dusk
Image adapted from a photo by Vauxford, CC BY-SA 4.0.

Hello and welcome. In this post, we'll look at the instrument panel and how to reset the service indicator on the Peugeot 308 II (2015-present). The gauges and indicators on your Peugeot 308 tell you when the next service is due, whether the engine oil level is correct, how hot the coolant is and, on BlueHDi Diesel engines, how much AdBlue range you have left. Knowing how to read them helps you deal with problems before they become serious, and knowing how to reset the service indicator saves you a trip if you service the car yourself. Some displays depend on the version or equipment fitted, including whether your car has an instrument panel with dials or a digital instrument panel.

How do you reset the service indicator on a Peugeot 308 II?

Switch the ignition on, then use the trip-reset or lighting-stalk button as described below until the service indicator returns to zero or the new countdown appears.

Service-indicator key or spanner symbol on the instrument panel, with the remaining distance or time
Peugeot 308 II service-indicator reset: ignition on, then press the trip-reset or stalk button

Quick Reference

Scroll the table sideways.

SectionIn short
Service indicatorWhen servicing is due and how to reset it
Engine oil level indicatorOil level status shown at ignition on
Coolant temperature indicatorZone A is correct, zone B is too hot
AdBlue range indicators (BlueHDi)AdBlue range, top-up stages and SCR faults

Service indicator

The service indicator shows servicing information in terms of distance (kilometres or miles) and time (months or days). The alert is given at whichever of these two terms is reached first.

The information appears on the instrument panel. Depending on the version of your car:

  • The distance recorder display line shows the distance remaining before the next service is due, or the distance travelled since it was due, preceded by the "-" sign.
  • An alert message shows the distance remaining, as well as the period before the next service is due or how long it is overdue.

The value shown is calculated from the distance covered and the time elapsed since the last service. The alert can also be triggered close to a due date.

Scroll the table sideways.

LampStateCauseAction
Service spannerOn temporarily when the ignition is switched on.Between 620 and 1,860 miles (1,000 and 3,000 km) remain before the next service is due.-
Service spannerFixed, when the ignition is switched on.The next service is due in less than 620 miles (1,000 km).Have your vehicle serviced very soon.
Service spanner flashingFlashing then fixed, when the ignition is switched on. With BlueHDi Diesel engines, combined with the Service warning lamp.The servicing interval has been exceeded.Have your vehicle serviced as soon as possible.

The service indicator must be reset after each service. If you have serviced your car yourself, follow the steps for your instrument panel.

With instrument panel with dials:

  1. Ignition off: Switch the ignition off.
  2. Hold the button: Press and hold the button on the instrument panel.
  3. Ignition on: Switch on the ignition. The distance recorder display begins a countdown.
  4. Release: When the display shows =0, release the button on the instrument panel. The spanner symbol disappears.

With digital instrument panel:

  1. Ignition off: Switch the ignition off.
  2. Hold the button: Press and hold the button on the end of the lighting control stalk.
  3. Ignition on: Switch on the ignition without starting the engine. A temporary display window appears and a countdown begins.
  4. Release: When the display shows =0, release the lighting control stalk button. The spanner symbol disappears.

If you disconnect the battery after resetting, lock the car and wait at least 5 minutes for the reset to be registered.

You can check the servicing information at any time. With the instrument panel with dials, press the button on the instrument panel to display it temporarily. With the digital instrument panel, go to the Driving/Vehicle menu, select the "Driving functions" tab, then "Diagnostic".

Engine oil level indicator

On versions fitted with an electric gauge, the engine oil level status appears on the instrument panel for a few seconds when you switch on the ignition, after the servicing information. The reading is only correct if the car is on level ground and the engine has been off for more than 30 minutes.

  • Oil level correct: "OIL" or the message "Oil level correct" is displayed, depending on the instrument panel.
  • Low oil level: the message "Oil level incorrect" appears, together with the Service warning lamp and an audible signal. If a check with the dipstick confirms the level is low, top it up to avoid damage to the engine.
  • Gauge fault: "OIL_ _" or the message "Oil level measurement invalid" is displayed, depending on the instrument panel, together with the Service warning lamp and an audible signal. Contact a PEUGEOT dealer or a qualified workshop.

If the electric gauge is faulty, the oil level is no longer monitored, so you must check it yourself using the manual dipstick under the bonnet. Check the fluid levels, or ask a PEUGEOT dealer or a qualified workshop.

Coolant temperature indicator

The coolant temperature indicator works with the engine running:

  • Zone A: the temperature is correct.
  • Zone B: the temperature is too high. The associated warning lamp and the STOP warning lamp light up in red, with a message and an audible signal.

If the needle reaches zone B, stop the car as soon as it is safe to do so and wait a few minutes before switching off the engine. After switching off the ignition, open the bonnet carefully and check the coolant level, as described for checking the fluid levels, or ask a PEUGEOT dealer or a qualified workshop.

AdBlue range indicators (BlueHDi)

BlueHDi Diesel engines combine the SCR (Selective Catalytic Reduction) emissions control system with the Diesel particle filter (DPF) to treat the exhaust gases. They cannot work without AdBlue® fluid.

When the AdBlue® level falls below the reserve level (between 1,500 and 0 miles (2,400 and 0 km)), a warning lamp lights up when you switch on the ignition, and the instrument panel shows an estimate of the distance you can travel before engine starting is prevented. Once the AdBlue® tank is empty, the engine starting prevention system required by regulations activates automatically, and you cannot start the engine until you have topped up to the minimum level.

While the range is greater than 1,500 miles (2,400 km), it is not shown automatically. With the instrument panel with dials, press the button to display the range temporarily. With the digital instrument panel, press the "Diagnostic" button in the Driving/Vehicle touch screen menu.

Below the reserve level, warning lamps light up and messages regularly remind you to top up:

Scroll the table sideways.

Remaining rangeAction
Between 1,500 miles and 500 miles (2,400 km and 800 km)Top up.
Between 500 miles and 62 miles (800 km and 100 km)Top up as soon as possible.
Between 62 miles and 0 miles (100 km and 0 km)A top-up is vital, there is the risk that the engine will be prevented from starting.
0 miles (km)To be able to restart the engine, add at least 5 litres of AdBlue® to the tank.

If the SCR emissions control system develops a fault, the alert goes through these stages:

  • Malfunction detected: warning lamps come on with an audible signal and an "Emissions fault" or "NO START IN" message. The alert appears while driving when the fault is first detected, then each time you switch on the ignition while the fault persists. If the fault is temporary, the alert disappears during the next journey after the system's self-diagnostic checks.
  • Malfunction confirmed: if the fault indication is still shown permanently after 31 miles (50 km) of driving, the fault is confirmed. The AdBlue warning lamp flashes and an "Emissions fault: Starting prevented in X miles" or "NO START IN X miles" message shows the remaining range. While driving, the message appears every 30 seconds, and it repeats when you switch on the ignition. You can drive for up to 685 miles (1,100 km) before starting is prevented. Have the system checked by a PEUGEOT dealer or a qualified workshop as soon as possible.
  • Starting prevented: the "Emissions fault: Starting prevented" or "NO START IN" message appears whenever you switch on the ignition. To restart the engine, contact a PEUGEOT dealer or a qualified workshop.

Frequently Asked Questions

How do I reset the service light on my Peugeot 308?

Switch the ignition off, press and hold the button on the instrument panel (or on the end of the lighting control stalk on the digital instrument panel), then switch the ignition on. When the display shows =0, release the button and the spanner symbol disappears.

Why is the spanner flashing on my Peugeot 308?

A spanner that flashes and then stays on when you switch on the ignition means the servicing interval has been exceeded. Have your car serviced as soon as possible.

What does "Oil level measurement invalid" mean on a Peugeot 308?

It means the electric oil gauge is faulty, so the oil level is no longer monitored. Check the level with the manual dipstick under the bonnet and contact a PEUGEOT dealer or a qualified workshop.

How much AdBlue do I need to restart my Peugeot 308 when the range reaches 0?

You need to add at least 5 litres of AdBlue® to the tank to be able to restart the engine.

A quick look at the gauges when you switch on the ignition tells you a lot about the health of your Peugeot 308. Keep an eye on the service spanner, the oil level message, the coolant needle and your AdBlue range, and if in doubt, ask a PEUGEOT dealer or a qualified workshop.

More Peugeot 308 Guides

If a lamp comes on alongside these gauges, see our guides to the Peugeot 308 red warning lights, the Peugeot 308 orange warning lights and the Peugeot 308 green and blue indicator lamps.

Don't forget to follow us on Instagram for more Peugeot guides!

This is an independent guide, not an official Peugeot publication. If in doubt, contact a PEUGEOT dealer or a qualified workshop before carrying out any work.

Related guides: Peugeot 308 model guides.

Cover adapted from a photograph by Vauxford — Wikimedia Commons, CC BY-SA 4.0 (AI edited).

Related guides

Guide ·

Peugeot 308 Fuse Box and Fuses (2021-2025)

Hello and welcome. In this article we look at the fuses on the Peugeot 308 III (2021-2025). We will cover who should change a fuse and what to know before fitting extra electrical equipment or accesso

Guide ·

Peugeot 308 Fuse Box and Fuses (2015-present)

Hello and welcome. In this article we look at the fuseboxes and fuses on the Peugeot 308 II (2015-present). We will cover where the fuseboxes are, how a fuse is changed and which functions each fuse p

Guide ·

Peugeot 308 Bulb Replacement (2021-2025)

Hello and welcome. In this article we look at bulb replacement on the Peugeot 308 III (2021-2025). We will cover which lamps are LED, where the front and rear lamps sit, the rear foglamp and reversing