Peugeot 3008 II Indicators: Green and Blue Warnings (2016-present)

Green and blue lamps on your Peugeot 3008 are indicator lamps. Rather than warning you about a fault, they show you the operating status of a system, such as your lights, Stop & Start or a driving aid that you have switched on.

This guide covers the second-generation Peugeot 3008 (2016-present), based on handbook edition ed01-23 for vehicles produced from 3 October 2023. Some lamps only appear on certain versions or with certain equipment, so your car may not show every lamp listed here.

Quick Reference

Blind spot monitoring

This lamp shows the blind spot monitoring symbol. When it is lit steadily, the blind spot monitoring function has been activated.

What to do:

• No action is needed. The lamp simply confirms that the function is on.

Hill Assist Descent Control

This lamp shows the Hill Assist Descent Control symbol. It can light up steadily or flash.

When it is lit steadily, the function has been activated, but the conditions it needs to regulate your speed are not met, for example the gradient or the gear engaged.

When it flashes, the function is regulating the speed of your car.

What to do:

If the lamp is lit steadily:

• No action is needed. The function is on but is not regulating your speed yet.

If the lamp is flashing:

• Your car is being braked by the system.
• The brake lamps come on during the descent.

Stop & Start

This lamp shows the Stop & Start symbol. It can light up steadily or flash for a short time.

When it is lit steadily, Stop & Start has put the engine into STOP mode because your car has stopped.

When it flashes temporarily, STOP mode is momentarily unavailable or START mode has been triggered automatically.

What to do:

If the lamp is lit steadily:

• No action is needed. Stop & Start is working as intended.

If the lamp is flashing temporarily:

• For more information, see the Driving section of your handbook.

Vehicle ready to drive (Rechargeable hybrid)

This lamp shows the ready to drive symbol on rechargeable hybrid versions. When it lights up steadily, with an audible signal as it comes on, your car is ready to drive.

What to do:

• The lamp goes out once you reach a speed of approximately 3 mph (5 km/h) and lights up again when your car stops moving.
• The lamp goes out when you turn off the engine and get out of the car.

Lane positioning assist

This lamp shows the lane positioning assist symbol. When it is lit steadily, the function has been activated.

What to do:

• All the conditions have been met and the system is operating.
• For more information, see the Driving section of your handbook.

Automatic wiping

This lamp shows the automatic wiping symbol. When it is lit steadily, automatic windscreen wiping is activated.

What to do:

• No action is needed. The lamp simply confirms that automatic wiping is on.

Direction indicators

This lamp shows the direction indicator symbol. When it flashes with an audible signal, your direction indicators are on.

What to do:

• No action is needed. The lamp simply confirms that your indicators are on.

Sidelamps

This lamp shows the sidelamp symbol. When it is lit steadily, your sidelamps are on.

What to do:

• No action is needed. The lamp simply confirms that your sidelamps are on.

Dipped beam headlamps

This lamp shows the dipped beam symbol. When it is lit steadily, your dipped beam headlamps are on.

What to do:

• No action is needed. The lamp simply confirms that your dipped beam headlamps are on.

Automatic headlamp dipping

This function can be shown by either of two automatic headlamp dipping symbols. When the lamp is lit steadily, the function has been activated through the touch screen (Driving/Vehicle menu) and the lighting control stalk is in the "AUTO" position.

What to do:

• For more information, see the Lighting and visibility section of your handbook.

Main beam headlamps

This lamp shows the main beam symbol. When it is lit steadily, your main beam headlamps are on.

What to do:

• No action is needed. The lamp simply confirms that your main beam headlamps are on.

If You're Not Sure

If you are not sure what a lamp is telling you, check whether it is lit steadily or flashing, and look out for any audible signal or message on the screen. Relating these to what your car is doing at the time helps you tell whether everything is normal. For more detail on any system, see the corresponding section of your handbook.

Green and blue lamps are there to keep you informed, confirming that a light, a driving aid or another system is doing what you asked. Once you know what each one means, you can glance at your instrument panel and know straight away what your Peugeot 3008 is up to.

Related guides: Peugeot 3008 II (2016-present) red warning lights, Peugeot 3008 II (2016-present) orange warning lights, Peugeot 3008 Warning Lamps: Blue and Green Warnings (general guide) and all Peugeot 3008 guides.