Peugeot 2008 I Indicators: Green and Blue Warnings (2015-2016)

Green and blue lamps on your instrument panel are operation indicator lamps. When one comes on, it simply confirms that the system concerned has been switched on and is working. They are there to keep you informed rather than to warn you of a fault.

This guide covers the first-generation Peugeot 2008 produced from 04/05/2015 (around 2015 to 2016), based on handbook edition ed01-15. Some lamps depend on the version or equipment of your car, so you may not see every one of them.

Quick Reference

Left-hand direction indicator

This lamp shows an arrow pointing to the left. It flashes, along with a buzzer, when you push the lighting stalk down to signal left.

What to do:

• No action is needed. The lamp just confirms that your left indicator is working.

Right-hand direction indicator

This lamp shows an arrow pointing to the right. It flashes, along with a buzzer, when you push the lighting stalk up to signal right.

What to do:

• No action is needed. The lamp just confirms that your right indicator is working.

Sidelamps

This is the sidelamps indicator lamp. It stays on steadily when the lighting stalk is set to the "Sidelamps" position.

What to do:

• No action is needed. The lamp confirms that your sidelamps are on.

Dipped beam headlamps

This is the dipped beam headlamps indicator lamp. It stays on steadily when the lighting stalk is set to the "Dipped beam headlamps" position.

What to do:

• No action is needed. The lamp confirms that your dipped beam headlamps are on.

Main beam headlamps

This is the main beam headlamps indicator lamp. It stays on steadily when you have pulled the lighting stalk towards you to switch on main beam.

What to do:

• To go back to dipped beam headlamps, pull the lighting stalk towards you again.

Front foglamps

This is the front foglamps indicator lamp. It stays on steadily when you have switched on the front foglamps using the ring on the lighting control stalk.

What to do:

• To switch off the front foglamps, turn the ring on the lighting control stalk rearward twice.

Automatic wiping

This is the automatic wiping indicator lamp. It stays on steadily when you have pushed the wiper control downwards, which means automatic front wiping is activated.

What to do:

• To switch off automatic wiping, push the wiper control stalk downwards again or move it to another position.

Stop & Start

This is the Stop & Start indicator lamp. It can either stay on steadily or flash briefly, and each tells you something different.

If it stays on steadily, the Stop & Start system has put the engine into STOP mode because the car has come to a stop, for example at red lights or in a traffic jam.

If it flashes for a few seconds and then goes off, either STOP mode is temporarily unavailable or START mode has been triggered automatically.

What to do:

If the lamp stays on steadily:

• Nothing is needed from you. As soon as you want to move off, the lamp goes off and the engine restarts automatically in START mode.

If the lamp flashes for a few seconds, then goes off:

• For details of the special cases with STOP mode and START mode, see the "Stop & Start" section of your handbook.

If You're Not Sure

Some lamps come on with a buzzer and a message in the instrument panel or multifunction screen, so read that message for more detail. If you encounter any problems, contact a PEUGEOT dealer or a qualified workshop.

Green and blue lamps are good news: they simply confirm that a system on your Peugeot 2008 is switched on and doing its job. For the red and amber lamps, take a look at our other warning light guides.

Related guides: Peugeot 2008 I (2015-2016) red warning lights, Peugeot 2008 I (2015-2016) orange warning lights, Peugeot 2008 Warning Lamps: Blue and Green Warnings (general guide) and all Peugeot 2008 guides.