Engine specifications, model codes, dimensions and identification markings for the Peugeot 108 I, including where to find the VIN and tyre label.
This guide brings together the technical specifications for your Peugeot 108: the engine and gearbox details, the model codes, how the dimensions are measured and where to find the identification markings, such as the VIN and the tyre label. It is useful when you need to check your car's details or quote them to a workshop.
Scroll the table sideways.
| Section | In short |
|---|---|
| Engine specifications | Engine, gearbox, model codes, capacity and power |
| Dimensions (mm) | Dimensions in mm, measured on an unladen car |
| Identification markings | Where to find the VIN and tyre label |
Your car's engine specifications are given in the vehicle's registration document, as well as in sales brochures. The handbook lists the following petrol engines and gearboxes:
Scroll the table sideways.
| Item | VTi 72, BVM (Manual 5-speed) | VTi 72, ETG (Electronic 5-speed) | VTi 72 S&S, BVM (Manual 5-speed) |
|---|---|---|---|
| Code | 1KR | 1KR | 1KR |
| Model codes | SCFBD, ...B1A...H1A...P1A...W1A | SCFBD, ...B1C...H1C...P1C...W1C | SCFB4, ...B1B...H1B...P1B...W1B |
| Cubic capacity (cm3) | 998 | 998 | 998 |
| EU standard max. power (kW) | 53 | 53 | 53 |
| Fuel | Unleaded | Unleaded | Unleaded |
The model codes tell you the body style:
The maximum power is the value type-approved on a test bed, under conditions defined in European legislation (Directive 1999/99/EC). The design of your 108 does not permit a towbar to be fitted. For more information, contact a PEUGEOT dealer or a qualified workshop.
The handbook gives your 108's dimensions in millimetres. These dimensions have been measured on an unladen vehicle, so they will not reflect the car with passengers or luggage on board.
Your 108 carries identification markings in three places. The handbook shows them separately for the 3-door and 5-door versions.
Check the tyre label whenever you need the correct sizes or pressures for your tyres.
The handbook lists the VTi 72 and VTi 72 S&S petrol engines, both code 1KR, with a cubic capacity of 998 cm3 and an EU standard maximum power of 53 kW. They run on unleaded fuel.
The VIN is stamped on the middle door pillar or rear door pillar on the right-hand side. It is also stamped on the crossmember under the front right-hand seat.
They are on the tyre label on the middle door pillar, on the driver's side. The label also shows the tyre sizes.
No. The handbook states that the design of the 108 does not permit a towbar to be fitted.
Knowing your 108's engine details, model code and identification markings makes it easier to order parts, book a service or check your tyres. Keep this guide handy, and for anything not covered here, contact a PEUGEOT dealer or a qualified workshop.
To find out what the lamps on your instrument panel mean, see our guides to the Peugeot 108 red warning lights and the Peugeot 108 green and blue indicator lamps.
Don't forget to follow us on Instagram for more Peugeot guides!
Related guides: Peugeot 108.
A flat battery is one of the most common reasons a car won't start. This guide explains how to reach the 12 V battery on your Peugeot 108, how to start the engine using another battery, and how to charge a disc…
The instrument panel on your Peugeot 108 shows you how far the car has travelled and how much fuel is left in the tank. This guide explains how to switch between the total and trip distance displays, how to res…
Your Peugeot 108 can monitor tyre pressure while you drive and warn you if one or more tyres lose pressure. This guide explains how the under-inflation detection system works, what to do when the alert comes on…
