Peugeot 108 I Indicators: Orange Warnings (2014-2015)
What each orange warning lamp on the Peugeot 108 (2014-2015) means, from ABS and emission faults to low fuel, and what you should do next.
Orange lamps on your Peugeot 108 tell you that a system has been switched off, needs your attention or has a fault. Some simply confirm something you have chosen to do, such as switching off traction control. Others mean the car needs checking soon. Any fault that turns on a warning lamp should be looked into.
This guide covers the first-generation Peugeot 108 (2014-2015), based on the handbook for cars produced from 1 May 2014. Some lamps depend on the version or equipment of your car, so you may not see all of them.
Quick Reference
Scroll the table sideways.
Warning
Urgency
In short
Rear foglamp
Information / status
Rear foglamp is switched on
Passenger's front airbag
Information / status
Shows if passenger airbag is on or off
Traction control (TRC)
Information / status
Traction control has been switched off
Dynamic stability control (DSC)
Information / status
DSC and traction control switched off
Stop & Start (e-VTI 68 engine)
Information / status
Stop & Start has been switched off
Anti-lock Braking System (ABS)
Get it checked soon
ABS fault, normal braking still works
Dynamic stability control and traction control (DSC/ TRC)
Get it checked soon
Flashing: working; steady: system fault
Emission control system
Get it checked soon
Fault in the emission control system
Low fuel level
Action needed from you
Fuel is low, refuel soon
Under-inflation
Action needed from you
Low pressure in one or more tyres
Stop & Start (e-VTi 68 engine)
Get it checked soon
Fault in the Stop & Start system
Speed limiter
Get it checked soon
Fault in the speed limiter
Keyless Entry and Starting system
Action needed from you
Electronic key battery is flat
Rear foglamp
This is the rear foglamp symbol, shown in orange. It stays on steadily when you have switched on the rear foglamp using the ring on the lighting control stalk.
What to do:
To switch the rear foglamp off, turn the ring on the lighting control stalk towards the rear.
Passenger's front airbag
These lamps appear in the seat belt and passenger's front airbag display. One of the two always stays on, depending on whether the passenger's front airbag is activated or deactivated using the control switch in the glove box.
What to do:
If the airbag activated lamp stays on, the switch in the glove box is set to ON and the passenger's front airbag is active:
Do not fit a rearward facing child seat on the front passenger seat.
If the airbag deactivated lamp stays on, the switch in the glove box is set to OFF and the passenger's front airbag is switched off:
You can fit a rearward facing child seat on the front passenger seat.
Do not do this if the Airbag warning lamp is on, as this means there is a fault with the airbags.
Traction control (TRC)
This is the traction control symbol, shown in orange. It stays on steadily after a brief press on the button, which means the traction control (TRC) system has been switched off.
What to do:
Press the button to switch the system back on.
If you leave it off, TRC switches itself back on from around 30 mph (50 km/h), and it is always active when you start the car.
See the traction control section of your handbook for more detail.
Dynamic stability control (DSC)
This is the dynamic stability control symbol, shown in orange. It stays on steadily when the button has been held for more than 3 seconds with the car stationary, which switches off both the traction control (TRC) and dynamic stability control (DSC) systems.
What to do:
Press the button to switch both systems back on.
DSC is switched on automatically every time you start the car.
See the stability control section of your handbook for more detail.
Stop & Start (e-VTI 68 engine)
This is the Stop & Start symbol, shown in orange. When it stays on steadily, the Stop & Start system has been switched off.
What to do:
Press the Stop & Start button again to switch the function back on.
See the Stop & Start section of your handbook for more detail.
Anti-lock Braking System (ABS)
This is the ABS symbol, shown in orange. When it stays on steadily, the anti-lock braking system has a fault. Your car still has conventional braking, but without the anti-lock function.
What to do:
Drive carefully and at reduced speed.
Contact a PEUGEOT dealer or a qualified workshop without delay.
Dynamic stability control and traction control (DSC/ TRC)
This is the DSC/TRC symbol, shown in orange. It can flash or stay on steadily, and the two have very different meanings.
What to do:
If the lamp is flashing, the DSC/TRC system is working to help you:
No action is needed. The system is improving traction and helping keep the car stable and on course.
If the lamp stays on steadily, the DSC/TRC system has a fault:
Have it checked by a PEUGEOT dealer or a qualified workshop.
Emission control system
This is the emission control symbol, shown in orange. When it stays on steadily, the emission control system has a fault.
What to do:
Contact a PEUGEOT dealer or a qualified workshop without delay.
Low fuel level
This is the fuel pump symbol, shown in orange. When it first comes on, there are approximately 5 litres of fuel left in the tank, which holds approximately 35 litres in total. It will come on every time you switch on the ignition until you add enough fuel.
What to do:
Refuel as soon as possible so you do not run out.
Never keep driving until the tank is empty, as this could damage the emission control and injection systems.
Under-inflation
This is the tyre pressure symbol, shown in orange. When it stays on steadily, the pressure in one or more of your tyres is too low.
What to do:
Check your tyre pressures as soon as possible, ideally when the tyres are cold.
Reset the system after adjusting any tyre pressure or changing a wheel.
See the under-inflation detection section of your handbook for how to do this.
Stop & Start (e-VTi 68 engine)
This is the Stop & Start symbol, shown in orange. When it flashes, the Stop & Start system has a fault.
What to do:
Have the Stop & Start system checked by a PEUGEOT dealer or a qualified workshop.
Speed limiter
The handbook shows two speed limiter symbols for this lamp, both in orange. When the lamp stays on steadily, the speed limiter has a fault.
What to do:
Have the speed limiter checked by a PEUGEOT dealer or a qualified workshop.
Keyless Entry and Starting system
This is the electronic key symbol, shown in orange. When it flashes and you hear an audible signal, the battery in your electronic key is flat.
What to do:
Replace the battery in the electronic key.
See the electronic key section of your handbook for how to do this.
If You're Not Sure
If a lamp comes on and you are not sure what it means, check whether it is steady or flashing and what the car is doing at the time, as that tells you whether things are normal or there is a fault. If you are still unsure, contact a PEUGEOT dealer or a qualified workshop.
Most orange lamps on the Peugeot 108 are either a reminder of something you have switched off or a sign that a system needs checking soon. Knowing which is which helps you deal with them calmly and keep your car in good shape.
A red warning lamp on your instrument panel means there is a fault, or a situation that needs action from you. Some red lamps only need a quick fix, such as closing a door or fastening a seat belt. Others mean you...
Green and blue lamps on your instrument panel are mostly indicator lamps. They confirm that a system has been switched on or is working, so in most cases they are simply there to keep you informed. Some can come on...
Red warning lamps on your Peugeot 108 tell you about a malfunction or show the status of a system. If one comes on while the engine is running or you are driving, it points to a fault that needs looking into. Check...