Peugeot 408Updated 11 min read

Peugeot 408 I Service Indicator Reset and Gauges

Read the gauges and service indicator on your Peugeot 408 (2022-2026): service spanner, oil level, coolant, power and charge indicators, reset steps.

Peugeot 408 (2022-2026) on a coastal road at dusk with its headlamps on
Image adapted from a photo by Alexander-93, CC BY-SA 4.0.

Hello and welcome. In this post, we'll look at the instrument panel and how to reset the service indicator on the Peugeot 408 I (2022-2026). Your Peugeot 408 shows a lot of useful information on the instrument panel: when your next service is due, the engine oil level, the coolant temperature, and on hybrid and electric versions, the power demand and the charge level of the traction battery. This guide explains what each gauge and indicator tells you and how to reset the service indicator after a service. Some indicators depend on the version or equipment fitted, so you may not see all of them on your 408.

How do you reset the service indicator on a Peugeot 408 I?

With the ignition on, use the trip-reset or lighting-stalk button as described below until the service indicator returns to zero or the new countdown appears.

Service-indicator key or spanner symbol on the instrument panel, with the remaining distance or time
Peugeot 408 I service-indicator reset: ignition on, then press the trip-reset or stalk button

Quick Reference

Scroll the table sideways.

SectionIn short
Service indicatorWhen your next service is due and how to reset it
Engine oil level indicatorOil level messages and what to do
Coolant temperature indicatorCoolant temperature zones and what to do if too hot
Power indicator (Hybrid, Rechargeable hybrid or Electric)Real-time power demand zones on hybrid and electric versions
Charge level indicator (Rechargeable hybrid or Electric)Battery charge, remaining range and low charge alerts
Thermal comfort consumption indicator (Electric)How much battery energy heating and air conditioning use
Manual testCheck indicators and view the alerts log
Total distance recorderTotal distance, changing units and instrument brightness

Service indicator

The service indicator tells you when your next service is due. It works in distance (miles or kilometres) and/or time (months or days), and the alert is given at whichever of these is reached first.

The servicing information appears on the instrument panel. Depending on the version of your car:

  • The distance recorder display line shows the distance remaining before the next service, or the distance travelled since the service was due, shown with a "-" sign in front.
  • An alert message shows the distance remaining, as well as the time left before the next service or how long it is overdue.

The value is calculated from the distance covered and the time elapsed since the last service. The alert may also be triggered close to a due date. Depending on your car's maintenance plan, the service is either a yearly visit or a complete service.

Scroll the table sideways.

LampStateCauseWhat to do
Service spannerOn temporarily when the ignition is switched on.Between 1,860 and 620 miles (3,000 and 1,000 km) or 60 and 21 days remain before the next service is due.
Service spannerFixed, when the ignition is switched on.The next service is due in less than 620 miles (1,000 km) or 21 days.Have your vehicle serviced very soon.
Service spanner flashingFlashing then fixed, when the ignition is switched on.The servicing interval has been exceeded.Have your vehicle serviced as soon as possible.

Resetting the service indicator

The service indicator must be reset after each service. If you have serviced your car yourself:

  1. Ignition off: Switch off the ignition.
  2. Hold the button: Press and hold the button on the end of the lighting control stalk.
  3. Ignition on: Switch on the ignition without starting the engine. A temporary display window appears and a countdown begins.
  4. Release: When the display shows =0, a confirmation message appears. Release the button on the lighting control stalk and the spanner symbol disappears.

If you disconnect the battery after doing this, lock the car and wait at least 5 minutes so the reset is registered.

Reminder of the servicing information

You can check the servicing information at any time in the Settings > Vehicle application on the touch screen, then by selecting Safety > Diagnostics.

Engine oil level indicator

On versions with an electric oil gauge, the engine oil level is shown on the instrument panel as a message for a few seconds when you switch on the ignition, after the servicing information. The reading is only correct if your car is on level ground and the engine has been off for more than 30 minutes.

Low oil level

You will see the message "Oil level incorrect" on the instrument panel, with the Service warning lamp and an audible signal. If a check with the dipstick confirms the level is low, top it up to avoid damage to the engine. Check the fluid levels, or ask a PEUGEOT dealer or a qualified workshop.

Oil gauge malfunction

You will see the message "Oil level measurement invalid" on the instrument panel. Contact a PEUGEOT dealer or a qualified workshop.

When the electric gauge is faulty, your oil level is no longer monitored. Until it is repaired, you must check the engine oil level yourself with the manual dipstick in the engine compartment.

Coolant temperature indicator

With the engine running, the coolant temperature indicator shows two zones:

  • Zone A: the temperature is correct.
  • Zone B: the temperature is too high. The coolant temperature warning lamp and the STOP warning lamp light up in red, with a message and an audible signal.

If the indicator reaches zone B:

  1. Stop: Stop the car as soon as it is safe to do so.
  2. Wait: Wait a few minutes before switching off the engine.
  3. Check the coolant: After switching off the ignition, open the bonnet carefully and check the coolant level.

Check the fluid levels, or ask a PEUGEOT dealer or a qualified workshop.

Power indicator (Hybrid, Rechargeable hybrid or Electric)

The power indicator shows the power demanded from your car in real time. It has 3 zones, and their meaning depends on your version.

Hybrid versions

  • POWER: high power demand, using both the petrol engine and the electric motor. The slider sits here during more dynamic driving, when you ask for high performance.
  • ECO: optimal use of energy, combustion or electric. The slider sits here when you are driving on electric power and when the petrol engine is being used efficiently, both of which you can reach with a suitable driving style.
  • CHARGE: energy recovery to recharge the traction battery. The slider sits here when you slow down, by lifting your foot off the accelerator or braking.

When you switch on the ignition and before the engine starts, the indicator only shows "OFF".

Rechargeable hybrid versions

  • POWER: high power demand, using both the petrol engine and the electric motor. The slider sits here during more dynamic driving, when you ask for high performance.
  • ECO: optimal use of energy, combustion or electric. The slider sits here when you are driving on electric power and when the petrol engine is being used efficiently. A symbol shows the point at which the petrol engine will restart, so you can ease off the accelerator to stay in electric mode.
  • CHARGE: energy recovery to partly recharge the traction battery. The slider sits here when you slow down, by lifting your foot off the accelerator or braking.

Electric versions

  • CHARGE: the traction battery is charging during deceleration and braking.
  • ECO: moderate energy consumption and optimised driving range.
  • POWER: the drive train is using energy during acceleration.
  • NEUTRAL: with the ignition on, the electric drive train neither uses nor generates energy. After sweeping across the indicator, the cursor returns to its neutral position between ECO and CHARGE.

With the ignition off, opening the driver's door activates the indicator, which moves to the neutral position between ECO and CHARGE.

Charge level indicator (Rechargeable hybrid or Electric)

This indicator shows the charge level of the traction battery and your remaining range.

Rechargeable hybrid versions

The charge level and the remaining range in electric mode are shown at all times when the car is switched on. The range shown depends on how you use the car (type of driving and speed), the outside temperature and the comfort equipment switched on.

Electric versions

The actual charge level and the remaining range are shown at all times when the car is started. With the ignition off, opening the driver's door activates the indicator.

Associated warning lamps

Two alert levels, one after the other, tell you that the available energy is low:

Scroll the table sideways.

LevelWhat you seeWhat to do
1st level: ReserveThe state of charge is low. The lamp is fixed and the indicator is in the red zone, with an audible signal.Check the remaining range on the instrument panel and put the car on charge as soon as possible.
2nd level: CriticalThe state of charge is critical. The lamp is fixed together with the reserve warning lamp, with an audible signal.You must put the car on charge.

At the critical level, the remaining range is no longer calculated and the drive train power gradually decreases. The heating and air conditioning are also switched off, even if the thermal comfort consumption indicator is not at the "ECO" level.

Thermal comfort consumption indicator (Electric)

This indicator is available in the instrument panel display pages. It shows how much of the traction battery's energy the heating and air conditioning are using.

You can use this equipment:

  • When the car is not plugged in, with the READY lamp lit.
  • When the car is plugged in, with the ignition on ("Lounge" mode).

Selecting ECO mode limits the performance of some of this equipment, and the indicator shows "0 w" (watts). With the heating on maximum, it shows "15000 w" (watts).

To heat or cool the cabin quickly, you can briefly select the maximum setting. Heavy use of this equipment can significantly reduce your range, so adjust the settings once you are comfortable, and check them again each time you start the car. After a long period without using the heating, you may notice a slight smell for the first few minutes.

Manual test

The manual test lets you check certain indicators and see the alerts log.

  1. Open the settings: Open the Settings > Vehicle application on the touch screen.
  2. Run the test: Select Safety > Diagnostics.

The instrument panel then shows:

  • Tyre pressures.
  • Engine oil level (depending on engine).
  • Next service due.
  • Current alerts.

This information also appears automatically every time you switch on the ignition.

Total distance recorder

The total distance recorder measures the total distance your car has travelled since its first registration.

With the ignition on, the total distance is shown at all times. It stays on for 30 seconds after you switch off the ignition, and it also appears when you open the driver's door and when you lock or unlock the car.

When you drive abroad, you may need to change the distance units (miles or km), because the speed shown must be in the official unit of that country (mph or km/h). Change the unit in the screen's configuration application, with the car stationary.

On rechargeable hybrid vehicles, the total distance recorder is only accessible from the trip computer. Use the trip computer on the instrument panel for those details.

Lighting dimmer

The lighting dimmer lets you adjust the brightness of the instruments and controls to suit the light outside.

  1. Open the settings: Open the Settings > Brightness application on the touch screen.
  2. Adjust: In the "Cockpit" category, press or move the slider to the setting you want.

Frequently Asked Questions

How do I reset the service light on my Peugeot 408?

Switch off the ignition, then press and hold the button on the end of the lighting control stalk while you switch the ignition back on without starting the engine. When the display shows =0 and a confirmation message appears, release the button and the spanner disappears.

What does a flashing spanner mean on a Peugeot 408?

If the service spanner flashes and then stays on when you switch on the ignition, the servicing interval has been exceeded. Have your car serviced as soon as possible.

What does "Oil level incorrect" mean on my Peugeot 408?

It means the electric gauge has detected a low oil level, and you will also see the Service warning lamp and hear an audible signal. Check the level with the dipstick and, if it is low, top it up to avoid damage to the engine.

How do I change the Peugeot 408 display from km to miles?

Change the distance unit in the screen's configuration application while the car is stationary. When driving abroad, the speed shown must be in the local country's official unit.

Your 408's gauges and service indicator help you keep on top of servicing, oil level, temperature and battery charge. Keep this guide handy. If in doubt, ask a PEUGEOT dealer or a qualified workshop.

More Peugeot 408 Guides

To understand the lamps that appear alongside these gauges, see our guides to Peugeot 408 red warning lights, Peugeot 408 orange warning lights and Peugeot 408 green and blue indicator lamps.

Don't forget to follow us on Instagram for more Peugeot guides!

This is an independent guide, not an official Peugeot publication. If in doubt, contact a PEUGEOT dealer or a qualified workshop before carrying out any work.

Related guides: Peugeot 408 model guides.

Cover adapted from a photograph by Alexander-93 — Wikimedia Commons, CC BY-SA 4.0 (AI edited).

Related guides

Guide ·

Peugeot 408 Fuse Box and Fuses (2022-2026)

Hello and welcome. In this article we look at the fuses on the Peugeot 408 I (2022-2026). We will cover who should change a fuse and what to know before adding extra electrical equipment to the car.

Guide ·

Peugeot 408 I Tyre Pressure

Hello and welcome. In this article we look at the tyre under-inflation detection system on the Peugeot 408 I (2022-2026): how it works, what to do when the alert comes on, how to reinitialise it and w

Guide ·

Peugeot 408 I Bulb Replacement

Hello and welcome. In this post we cover the lights on the Peugeot 408 I (2022-2026). We'll look at caring for the headlamp lenses, which LED lamps need a professional, the front and rear lamp layouts