Peugeot 208 Warning Lamps: Blue and Green Warnings

Welcome to our Peugeot 208 Warning Lamps Review. In this comprehensive guide, we will explore the various warning indicators and what they signify for your Peugeot 208. From understanding the Stop & Start system to the Lane Positioning Assist feature, we aim to provide clear and concise explanations to help you make the most of your driving experience. Whether you’re driving a petrol or electric model, knowing these indicators can enhance your safety and confidence on the road.

Peugeot 208 Warning Lamps: Stop & Start (Petrol) Warning

What Does Peugeot 208 Stop & Start (Petrol) Warning Mean?

The Stop & Start system indicator on the Peugeot 208 is designed to inform the driver about the operational status of the engine’s Stop & Start feature. When illuminated steadily, it indicates that the system has put the engine into STOP mode, typically engaged when the vehicle comes to a halt. This functionality is part of the car’s effort to reduce fuel consumption and emissions. Conversely, when the indicator is flashing, it signals that the STOP mode is temporarily unavailable, or the START mode has been automatically activated, suggesting the engine is restarting after a stop.

What Should I Do If the Stop & Start Warning Light Comes On in My Peugeot 208?

If the Stop & Start system indicator lights up on your dashboard, it’s essential to understand what action to take. If the light is steady, no immediate action is required from you, as this simply indicates the system has activated STOP mode due to the vehicle being stationary. However, if the indicator flashes, it indicates a temporary unavailability of STOP mode or an automatic reactivation of the engine (START mode). This feature is designed to work automatically and does not typically require intervention.

Vehicle Ready to Drive (Electric) Warning

What Does the Peugeot 208 Vehicle Ready to Drive (Electric) Warning Mean?

The “Vehicle Ready to Drive” indicator on the Peugeot 208 Electric signals that the vehicle is fully prepared to be driven. This indicator, which comes on along with an audible signal, reassures the driver that the electric motor is active, and the car is ready to move. Additionally, it indicates that the thermal comfort systems, such as heating and air conditioning, are available for use. The lamp is designed to extinguish once the vehicle exceeds a speed of approximately 3 mph (5 km/h) and will illuminate again when the vehicle comes to a stop. This cycle helps drivers understand when the vehicle is in a ready state, especially in stop-and-go traffic.

What Should I Do If the Vehicle Ready to Drive Light Comes On in My Peugeot 208?

When the “Vehicle Ready to Drive” light illuminates, it signifies that your Peugeot 208 Electric is ready for operation. No specific action is required from the driver apart from driving the vehicle as normal. The indicator serves as a confirmation that all systems are go, providing peace of mind before starting your journey. Once you begin driving and exceed the threshold speed of 3 mph (5 km/h), the light will automatically turn off, indicating the electric motor is engaged and the vehicle is in motion.

Remember, the light will come back on as a reminder of the car’s readiness each time you come to a stop. When you turn off the motor and exit the vehicle, the lamp will also extinguish, signaling the deactivation of the vehicle’s ready state.

Lane Positioning Assist Warning

What Does the Peugeot 208 Lane Positioning Assist Warning Mean?

The Lane Positioning Assist indicator on the Peugeot 208 signifies that the system is currently active and functioning properly. This feature is designed to help drivers maintain their vehicle within the lane boundaries, enhancing safety and comfort during drives. When the indicator remains fixed, it confirms that not only has the function been activated, but also that all necessary conditions for its operation have been met. This system plays a critical role in supporting drivers, particularly on highways and well-marked roads, by assisting in steering adjustments to keep the car centered in its lane.

What Should I Do If the Lane Positioning Assist Light Is On in My Peugeot 208?

When the Lane Positioning Assist light is illuminated on your dashboard, it means the system is engaged and actively working. As a driver, you should continue to focus on the road and maintain control of the vehicle, relying on the system as an aid rather than a replacement for active driving. Ensure that lane markings are clear and that environmental conditions do not hinder the system’s functionality. Remember, the system is designed to enhance driving safety and comfort but does not substitute for the driver’s attention and judgment.

Automatic Wiping Warning

What Does the Peugeot 208 Automatic Wiping Warning Mean?

The Automatic Wiping indicator on the Peugeot 208 dashboard indicates that the automatic windscreen wipers have been activated. This feature automatically adjusts the wiper speed based on the intensity of the rainfall, providing optimal visibility without the need for manual adjustments. When the indicator is fixed, it signifies that the system is in operation and will continue to adjust the wiping speed as necessary to match the changing conditions.

What Should I Do If the Automatic Wiping Light Is On in My Peugeot 208?

When the Automatic Wiping light is illuminated, it simply means that the automatic windscreen wipers are active and functioning as intended. There is no need for direct action on your part unless you wish to manually control the wipers or adjust their sensitivity settings. If you prefer to manage the wipers manually or wish to modify the automatic feature’s settings, you can do so through the vehicle’s control interface. This feature is designed to enhance driving comfort and safety by ensuring clear visibility through the windscreen in varying weather conditions.

Direction Indicators Warning

What Does the Peugeot 208 Direction Indicators Warning Mean?

The Direction Indicators warning on the Peugeot 208 indicates that the turn signals or hazard lights are actively in use. This is signified by a flashing light on the dashboard, accompanied by an audible clicking sound. The purpose of this indicator is to alert the driver that the vehicle’s direction indicators are on, signaling a turn or lane change to other road users, or that the hazard lights have been activated to warn of a vehicle stopped or experiencing difficulties.

What Should I Do If the Direction Indicators Light Comes On in My Peugeot 208?

If the Direction Indicators light flashes and you hear the accompanying audible signal, first ensure that it is intentionally activated, either for turning, changing lanes, or for hazard warning purposes. If the indicators are on by mistake, you should promptly turn them off to avoid confusing other drivers. If the indicators are correctly in use, no further action is required; simply proceed with your intended maneuver while observing road safety rules. Remember, the use of direction indicators is crucial for safe driving, as it communicates your intentions to other road users, helping to prevent accidents.

Peugeot 208 Warning Lamps: Sidelamps Warning

What Does the Peugeot 208 Sidelamps Warning Mean?

The Sidelamps indicator on the Peugeot 208 dashboard signifies that the sidelamps, also known as parking lights, are currently activated. These lights are typically used to make the vehicle more visible to others in dimly lit conditions, such as at dusk or dawn, or when parked on the side of a road. The fixed illumination of this indicator is a reminder that these lights are on, ensuring that your vehicle stands out in low visibility conditions for enhanced safety.

What Should I Do If the Sidelamps Light Is On in My Peugeot 208?

When the Sidelamps light is on, it indicates that your vehicle’s sidelamps are engaged. If you have turned them on intentionally, for instance, to increase visibility during early morning or late evening driving, or while parked in a poorly lit area, no immediate action is required. However, if the sidelamps were activated unintentionally or if there is no need for them (e.g., during daylight hours with good visibility), it’s a good practice to turn them off to conserve battery power. Always remember to adjust your vehicle’s lighting according to the driving conditions to ensure both your safety and the safety of others on the road.

Dipped Beam Headlamps Warning

What Does the Peugeot 208 Dipped Beam Headlamps Warning Mean?

The Dipped Beam Headlamps indicator on the Peugeot 208 dashboard lights up to inform the driver that the dipped beam headlamps are currently activated. Dipped beams, also known as low-beam headlights, are designed to provide ample illumination for the driver without causing glare or discomfort to oncoming traffic. This setting is ideal for night driving, during poor weather conditions, or in any situation where enhanced visibility is required, but it’s crucial to avoid blinding other road users.

What Should I Do If the Dipped Beam Headlamps Light Is On in My Peugeot 208?

When the Dipped Beam Headlamps indicator is illuminated, it means your vehicle’s low-beam headlights are on and functioning correctly. If you’ve activated them due to low visibility conditions, such as at night or in bad weather, then you’re using them as intended. However, if the conditions improve or if you find yourself in well-lit areas where additional lighting is unnecessary, you might consider switching to your vehicle’s daytime running lights or sidelights to conserve energy and reduce glare. Always be mindful of your lighting settings to ensure they’re appropriate for your current driving environment, thereby maintaining safety for yourself and others on the road.

Automatic Headlamp Dipping Warning

What Does the Peugeot 208 Automatic Headlamp Dipping Warning Mean?

The Automatic Headlamp Dipping indicator on the Peugeot 208 illuminates to notify the driver that the automatic headlamp dipping function is activated. This advanced feature automatically adjusts the headlamps between high and low beam based on the driving conditions and the presence of oncoming vehicles or vehicles ahead. Activation is done through the vehicle’s touchscreen interface, and the lighting control stalk must be set to the “AUTO” position for this functionality to operate. This system enhances nighttime driving safety by ensuring optimal lighting conditions without dazzling other road users.

What Should I Do If the Automatic Headlamp Dipping Light Is On in My Peugeot 208?

When the Automatic Headlamp Dipping indicator is on, it signifies that this convenience and safety feature is engaged and working as intended. Your role as a driver is to ensure that the lighting control stalk remains in the “AUTO” position to allow for automatic transitioning between high and low beams based on the external lighting conditions and traffic. This technology is designed to provide a seamless driving experience during night-time or low-light conditions, adjusting your headlamps appropriately to maintain visibility and prevent blinding other drivers.

Main Beam Headlamps Warning

What Does the Peugeot 208 Main Beam Headlamps Warning Mean?

The Main Beam Headlamps indicator on the Peugeot 208 dashboard indicates that the main beam, also known as high-beam headlights, are currently activated. These headlights provide a bright, direct light that enhances visibility significantly over longer distances ahead of the vehicle. Main beams are particularly useful in very low-light conditions, such as on rural roads or in areas without street lighting, where you need to see further ahead to spot potential hazards early.

What Should I Do If the Main Beam Headlamps Light Is On in My Peugeot 208?

When the Main Beam Headlamps light is illuminated, it indicates that your vehicle’s high-beams are engaged. While these lights are excellent for improving visibility, they can also dazzle oncoming drivers, so it’s crucial to use them responsibly. You should only use main beam headlights when driving in poorly lit areas and should always switch to dipped beams when you encounter oncoming traffic or are driving closely behind another vehicle to avoid causing glare. Remember to adjust your headlights according to the current road conditions and traffic to ensure safety for yourself and other road users.

Foot on the Brake Warning

What Does the Peugeot 208 Foot on the Brake Warning Mean?

The “Foot on the Brake” warning light on the Peugeot 208 illuminates to remind the driver to apply pressure to the brake pedal under specific circumstances. This light comes on when there’s insufficient or no pressure detected on the brake pedal, which is a necessary action before performing certain tasks, such as:

1. Releasing the parking brake with the engine running, particularly when the vehicle is equipped with the EAT6 automatic gearbox and is set in position P (Park).
2. With the EAT8 automatic gearbox or when using the drive selector, it may be necessary to depress the brake pedal to shift the gearbox from mode N (Neutral).

This indicator ensures that the vehicle is safely controlled before it starts moving, preventing unintended vehicle movement.

What Should I Do If the Foot on the Brake Light Comes On in My Peugeot 208?

If the “Foot on the Brake” light appears on your dashboard, you should immediately press the brake pedal firmly. This action is especially important:

1. Before attempting to release the parking brake, particularly if your vehicle has an automatic gearbox and is in Park position.
2. When needing to unlock the gearbox from Neutral mode with an EAT8 automatic gearbox or when using the drive selector.

This requirement is a safety measure designed to prevent the vehicle from unintentionally moving when you shift out of Park or Neutral. If the warning lamp remains illuminated despite pressing the brake pedal, ensure you’re applying sufficient pressure. If the issue persists, it might indicate a problem with the brake system’s sensor or the pedal’s mechanism, and you should consult a professional or a Peugeot authorized service center for further assistance.

Automatic Gearbox (EAT8/Hybrid) or Drive Selector (Electric) Warning

What Does the Peugeot 208 Automatic Gearbox (EAT8/Hybrid) or Drive Selector (Electric) Warning Mean?

This warning light on the Peugeot 208 indicates that the automatic gearbox (applicable to EAT8/Hybrid models) or the drive selector (for Electric models) is currently locked. This safety feature prevents unintended changes in the vehicle’s drive mode. When this indicator is fixed, it signifies that the system requires the driver to press the Unlock button before any adjustments to the gearbox or drive selector can be made. This mechanism ensures that changes to the vehicle’s transmission settings are made deliberately, enhancing safety by preventing accidental gear engagement.

What Should I Do If the Automatic Gearbox or Drive Selector Light Is On in My Peugeot 208?

If you notice that the warning light for the automatic gearbox (EAT8/Hybrid) or drive selector (Electric) is illuminated on your dashboard, indicating that the system is locked, you should press the Unlock button associated with your gearbox or drive selector. This action will unlock the system, allowing you to change gears or drive modes as needed.

Always ensure your vehicle is in a safe condition to perform these actions—preferably while stationary or in a safe environment to change drive modes. If the system does not unlock after pressing the button, or if the warning light remains illuminated, there may be a malfunction within the transmission system. In such cases, it’s advised to consult the vehicle’s manual for troubleshooting tips or contact a professional or authorized Peugeot service center for assistance.

In conclusion, understanding the Peugeot 208 Warning Lamps is crucial for maintaining optimal performance and safety. These indicators provide valuable information about your vehicle’s status and help you respond appropriately to different driving conditions. By familiarizing yourself with these signals, you can ensure a smoother and more informed driving experience.

For more detailed insights into the Peugeot 208, check out our Peugeot 208 Review where we delve deeper into its features and performance. If you own a petrol version of the Peugeot 208 and want to learn more about its engine specifics, visit our Peugeot 208 Engine and Performance Review.

Check our Instagram for more!