Peugeot 5008 Indicators: Red Warnings

Welcome to our Peugeot 5008 Indicators review. In this guide, we’ll explore the various warning indicators on the Peugeot 5008, helping you understand what they mean and what actions you should take when they light up. From the Stop Warning to the Traction Battery Overheating warning, each indicator plays a crucial role in ensuring your vehicle’s safety and performance. Let’s dive into the details and ensure you’re well-prepared to respond to these important signals.

Peugeot 5008 Indicators: Stop Warning

What Does Peugeot 5008 Stop Warning Mean?

Illuminates steadily, accompanied by an audible signal, a message on the display, and another warning lamp. A major fault or major electrical fault has been detected in the engine, braking system, power steering system, or automatic transmission.

What Should I Do If the Stop Warning Light Comes On in My Peugeot 5008?

If you are driving and in a position to stop, slow down. Pull right, avoid going too fast. You must definitely stop the vehicle. Stop and turn off the ignition as soon as it is safe to do so. Contact a PEUGEOT Authorized Dealer or Authorized Service.

Maximum Coolant Temperature

What Does Peugeot 5008 Maximum Coolant Temperature Warning Mean?

The warning lamp illuminates steadily, indicating that the temperature of the cooling system has reached a critically high level. This can signify that the engine is overheating due to various reasons such as insufficient coolant, a malfunctioning thermostat, or a failing water pump. The high temperature in the cooling system needs immediate attention to prevent severe damage to the engine components.

What Should I Do If the Maximum Coolant Temperature Warning Light Comes On in My Peugeot 5008?

If the maximum coolant temperature warning light comes on while driving, it’s crucial to take immediate action. First, reduce your speed and try to drive as gently as possible to minimize engine stress. Look for a safe place to pull over and stop the vehicle as soon as it is safe to do so. Turn off the engine and allow it to cool down. Do not attempt to open the hood until the engine has cooled to avoid burns from hot steam or coolant. Once the engine is cool, check the coolant level and top it up if necessary.

If the coolant level is adequate and the warning light persists, there might be a more serious issue requiring professional assistance. In such cases, contact a PEUGEOT Authorized Dealer or Authorized Service for a thorough inspection and repair.

Engine Oil Pressure

What Does Peugeot 5008 Engine Oil Pressure Warning Mean?

The engine oil pressure warning light illuminates steadily, indicating a fault within the engine’s lubrication system. This warning is critical because it signifies that the engine is not receiving adequate oil pressure, which is essential for lubricating the engine components and preventing excessive wear and tear. Low oil pressure can result from various issues such as low oil levels, a faulty oil pump, or blockages within the oil passages.

What Should I Do If the Engine Oil Pressure Warning Light Comes On in My Peugeot 5008?

If the engine oil pressure warning light comes on while driving, it is imperative to act immediately. First, reduce your speed and look for a safe place to pull over and stop the vehicle as soon as possible. Turn off the engine to prevent any potential damage. Once the engine is off, check the oil level using the dipstick and top up if necessary. Be cautious when opening the hood and handling the dipstick if the engine is still hot. If the oil level is adequate but the warning light remains on, it indicates a more serious issue that needs professional attention.

Contact a PEUGEOT Authorized Dealer or Authorized Service to inspect the lubrication system thoroughly and perform the necessary repairs to avoid long-term damage to your engine.

Traction Battery Overheating (Hybrid or Rechargeable Hybrid)

What Does Peugeot 5008 Traction Battery Overheating Warning Mean?

The traction battery overheating warning light illuminates steadily, combined with the STOP warning lamp, and is accompanied by an audible signal and a message on the display. This warning indicates that the temperature of the traction battery in your hybrid or rechargeable hybrid Peugeot 5008 has reached a dangerously high level. Overheating can occur due to various reasons, such as excessive driving in hot conditions, a malfunctioning cooling system, or internal faults within the battery itself.

What Should I Do If the Traction Battery Overheating Warning Light Comes On in My Peugeot 5008?

If the traction battery overheating warning light comes on while you are driving, you need to act promptly. First, reduce your speed and look for a safe place to stop the vehicle immediately. Once you have stopped, turn off the ignition to help reduce the temperature of the battery. It is crucial to evacuate the vehicle as quickly as possible and move to a safe distance from the car, as the overheating battery poses a significant safety risk. Do not attempt to open the hood or inspect the battery yourself.

Contact emergency services and a PEUGEOT Authorized Dealer or Authorized Service to handle the situation professionally. They will take the necessary measures to cool down the battery and address any underlying issues to ensure your vehicle is safe to drive again.

Traction Battery Malfunction

What Does Peugeot 5008 Traction Battery Malfunction Warning Mean?

The traction battery malfunction warning light illuminates steadily, combined with the Service warning lamp, and is accompanied by a message on the display. This warning signifies that there is a fault within the traction battery of your hybrid or rechargeable hybrid Peugeot 5008. Such faults can stem from issues like battery degradation, electrical faults, or problems within the battery management system, which need to be addressed to maintain the vehicle’s performance and safety.

What Should I Do If the Traction Battery Malfunction Warning Light Comes On in My Peugeot 5008?

If the traction battery malfunction warning light comes on, it is essential to take immediate action. While the vehicle may still be drivable, it is recommended to avoid driving long distances and to seek professional assistance as soon as possible. Contact a PEUGEOT Authorized Dealer or Authorized Service to schedule an inspection of your vehicle. The service technicians will diagnose the fault and determine the necessary repairs or replacements needed to resolve the issue. Ignoring this warning could lead to further complications and potentially compromise the safety and efficiency of your vehicle.

System Malfunction (Hybrid or Rechargeable Hybrid)

What Does Peugeot 5008 System Malfunction Warning Mean?

The system malfunction warning light illuminates steadily, indicating that there is a fault within the hybrid system of your hybrid or rechargeable hybrid Peugeot 5008. This warning suggests that the vehicle’s hybrid system, which includes the electric motor, battery, and associated control systems, is not functioning correctly. Faults in the hybrid system can impact the vehicle’s performance, efficiency, and safety, necessitating prompt attention.

What Should I Do If the System Malfunction Warning Light Comes On in My Peugeot 5008?

If the system malfunction warning light comes on while you are driving, it is crucial to take immediate action. First, reduce your speed and try to drive gently to minimize strain on the hybrid system. Look for a safe place to pull over and stop the vehicle as soon as it is safe to do so. Turn off the ignition and wait for a few minutes before restarting the car. If the warning light persists after restarting, do not attempt to continue driving.

Contact a PEUGEOT Authorized Dealer or Authorized Service for a thorough inspection of the hybrid system. Professional technicians will diagnose the fault and carry out the necessary repairs to ensure the hybrid system operates safely and efficiently. Ignoring this warning could lead to further damage and potential safety risks.

Cable Connected (Rechargeable Hybrid)

What Does Peugeot 5008 Cable Connected Warning Mean?

The cable connected warning light illuminates steadily when the ignition is switched on, indicating that the charging cable is connected to the vehicle’s connector. This warning is accompanied by a message on the display and signifies that the vehicle is currently in the process of charging or is ready to charge. It is a reminder that the vehicle cannot be started while the charging cable is connected.

What Should I Do If the Cable Connected Warning Light Comes On in My Peugeot 5008?

If the cable connected warning light comes on when you switch on the ignition, it means the charging cable is still plugged into the vehicle. To proceed, first ensure the vehicle is not charging and that it is safe to disconnect the cable. Carefully remove the charging cable from the vehicle’s connector and close the charging flap. This will allow you to start the vehicle normally. It is essential to always ensure that the charging cable is disconnected and the flap is securely closed before attempting to start your Peugeot 5008 to avoid any potential issues or damage.

12V Battery Charge

What Does Peugeot 5008 12V Battery Charge Warning Mean?

The 12V battery charge warning light illuminates steadily, indicating a fault in the battery charging circuit. This could be due to issues such as dirty terminals, a loose or severed alternator belt, or other faults within the charging system. Proper charging of the 12V battery is essential for the reliable operation of your vehicle’s electrical systems and accessories.

What Should I Do If the 12V Battery Charge Warning Light Comes On in My Peugeot 5008?

If the 12V battery charge warning light comes on while driving, it’s important to address the issue promptly. First, safely pull over and stop the vehicle. If the electric parking brake stops working, you need to immobilize the vehicle:

1. For manual gearbox vehicles, engage a gear.
2. For automatic gearbox vehicles, place chocks against one of the wheels.

Next, check the battery terminals. Clean and tighten the terminals to ensure a proper connection. If the warning lamp does not turn off when the engine is started again, this indicates that the issue persists and requires further attention. In such cases, it is advisable to contact a PEUGEOT Authorized Dealer or Authorized Service to inspect and repair the charging circuit. Ignoring this warning could lead to battery failure and compromise the vehicle’s electrical systems.

Peugeot 5008 Indicators: Door(s) Open

What Does Peugeot 5008 Door(s) Open Warning Mean?

The door(s) open warning light illuminates steadily, accompanied by a message identifying which door or the boot is not properly closed. If the vehicle is moving at a speed higher than 6 mph (10 km/h), an audible signal will also alert you. This warning indicates that one of the doors or the boot is not securely closed, which can be a safety hazard while driving.

What Should I Do If the Door(s) Open Warning Light Comes On in My Peugeot 5008?

If the door(s) open warning light comes on while driving, you should take immediate action to ensure the safety of all passengers. Safely pull over to the side of the road as soon as possible. Check each door and the boot to ensure they are all securely closed. Once all doors and the boot are properly closed, the warning light should turn off. If the warning light persists despite all doors and the boot being securely closed, there may be an issue with the door sensors. In such a case, contact a PEUGEOT Authorized Dealer or Authorized Service to inspect and resolve the issue to ensure the vehicle is safe to operate.

Seat Belts Not Fastened/Unfastened

What Does Peugeot 5008 Seat Belts Not Fastened/Unfastened Warning Mean?

The seat belts not fastened/unfastened warning light can either illuminate steadily or flash, and it is accompanied by an increasing audible signal. This warning indicates that one or more seat belts have not been fastened or have been unfastened while the vehicle is in motion. The seat belt warning system is designed to remind occupants to buckle up for their safety.

What Should I Do If the Seat Belts Not Fastened/Unfastened Warning Light Comes On in My Peugeot 5008?

If the seat belts not fastened/unfastened warning light comes on, it is important to address it immediately for the safety of all occupants. First, ensure that all passengers in the vehicle have their seat belts properly fastened. The driver should also double-check their own seat belt. If the warning persists after all seat belts are securely fastened, pull over to a safe location to check each seat belt’s buckle and latch to ensure they are properly engaged.

If the warning light continues to illuminate or flash despite all seat belts being fastened correctly, there may be a malfunction in the seat belt sensor system. In such cases, it is advisable to contact a PEUGEOT Authorized Dealer or Authorized Service to inspect and repair the seat belt warning system to ensure it operates correctly and continues to provide safety reminders.

Electric Parking Brake

What Does Peugeot 5008 Electric Parking Brake Warning Mean?

The electric parking brake warning light has two different indications: when it illuminates steadily, it means that the electric parking brake is applied. If the light is flashing, it indicates a fault in the application or release of the electric parking brake. This can signal a malfunction that needs to be addressed to ensure the parking brake functions correctly.

What Should I Do If the Electric Parking Brake Warning Light Comes On in My Peugeot 5008?

If the electric parking brake warning light is flashing, indicating a fault, it is important to take the following steps:

1. Safely park the vehicle on flat ground or a level surface to ensure stability.
2. If you have a manual gearbox, engage a gear to prevent the vehicle from rolling.
3. If you have an automatic gearbox, select mode P (Park) to secure the vehicle.
4. Switch off the ignition to reset the system and see if the warning light goes off.

If the warning light continues to flash after following these steps, it indicates a persistent issue with the electric parking brake. In such cases, it is crucial to contact a PEUGEOT Authorized Dealer or Authorized Service for a thorough inspection and repair of the parking brake system. Ensuring the electric parking brake functions correctly is essential for the safety and security of your vehicle when parked.

Braking

What Does Peugeot 5008 Braking Warning Mean?

The braking warning light can illuminate steadily for two different reasons. The first indication is that the brake fluid level in the braking circuit has dropped significantly, which can compromise the braking performance and safety of the vehicle. The second indication is a fault in the electronic brake force distribution (EBFD) system, which helps manage the distribution of braking force to ensure stability and control.

What Should I Do If the Braking Warning Light Comes On in My Peugeot 5008?

If the braking warning light comes on, it is crucial to address the issue immediately to ensure your vehicle’s braking system operates safely.

Low Brake Fluid Level:

1. Safely pull over and stop the vehicle.
2. Check the brake fluid level in the braking circuit. If it is low, top up the fluid with a type that complies with the manufacturer’s recommendations.
3. After topping up, if the warning light persists, there may be a more serious issue that requires professional attention.
4. Contact a PEUGEOT Authorized Dealer or Authorized Service for a thorough inspection and repair.

Faulty Electronic Brake Force Distribution (EBFD) System:

1. If the warning light indicates a fault with the EBFD system, safely pull over and stop the vehicle.
2. Turn off the ignition and then restart the vehicle to see if the warning light resets.
3. If the warning light remains on, it indicates a persistent issue with the EBFDsystem.
4. Contact a PEUGEOT Authorized Dealer or Authorized Service to inspect and repair the EBFD system to ensure your vehicle’s braking system is functioning correctly.

Ignoring these warnings can lead to compromised braking performance and safety, making it essential to address them promptly.

In summary, being familiar with the warning and indicator lamps on your Peugeot 5008 can significantly enhance your ability to respond to potential issues promptly and effectively. Whether it’s a critical fault in the engine or a reminder to buckle up, each light plays a vital role in ensuring your vehicle’s safety and performance.

By following the recommended actions for each warning, you can address problems early, avoid costly repairs, and maintain peace of mind while driving. Regular maintenance and staying vigilant to these warnings are key to keeping your Peugeot 5008 in top condition. Always remember, when in doubt, consult a PEUGEOT Authorized Dealer or Authorized Service to ensure your vehicle receives the professional care it deserves.

Understanding the warning indicators on your Peugeot 5008 is essential for maintaining the safety and performance of your vehicle. By familiarizing yourself with these indicators and knowing how to respond, you can prevent potential issues and ensure a smooth driving experience.

For more comprehensive information about the Peugeot 5008, check out our Peugeot 5008 Review.If you have the petrol version of the 5008 and want to learn more about its engine specifics, visit our Peugeot 5008 Petrol Engine Review. Stay informed and drive safely!

Check our Instagram for more!