Peugeot 408 Warning Lamps: Blue and Green Warnings

Welcome to our Peugeot 408 Warning Lamps review. In this comprehensive guide, we’ll delve into the various warning lamps and indicators you might encounter while driving your Peugeot 408. Understanding these warning lights is crucial for maintaining your vehicle’s performance and ensuring your safety on the road. From the Stop & Start system to the sophisticated Night Vision feature, we will explain what each warning light means and what actions you should take when they appear. Whether you’re a new owner or have been driving the Peugeot 408 for years, this review will help you navigate any warning lights with confidence.

Peugeot 408 Warning Lamps: Stop & Start

What Does Peugeot 408 Stop & Start Warning Mean?

The Stop & Start warning light can be steady or flashing temporarily. When the light is fixed, it indicates that the Stop & Start system has put the engine into STOP mode, typically when the vehicle comes to a halt. If the light is flashing temporarily, it signifies that the STOP mode is momentarily unavailable or that the START mode has been automatically triggered.

What Should I Do If the Stop & Start Warning Light Comes On in My Peugeot 408?

When the Stop & Start warning light is fixed, it’s generally a normal function indicating that the engine has been put into STOP mode. If the light is flashing, it may indicate a temporary unavailability of the STOP mode or an automatic triggering of the START mode. In either case, for more detailed information and guidance, refer to the Driving section of your vehicle’s manual. If the issue persists or if you have concerns, it’s advisable to contact a PEUGEOT Authorized Dealer or Authorized Service for further assistance.

Vehicle Ready to Drive (Rechargeable Hybrid)

What Does Peugeot 408 Vehicle Ready to Drive (Rechargeable Hybrid) Warning Mean?

The Vehicle Ready to Drive warning light is fixed and accompanied by an audible signal when it illuminates. This indicator signifies that the vehicle is ready to be driven. The light will turn off upon reaching a speed of approximately 3 mph (5 km/h) and will illuminate again when the vehicle comes to a stop. The lamp will also turn off when you switch off the motor and exit the vehicle.

What Should I Do If the Vehicle Ready to Drive Warning Light Comes On in My Peugeot 408?

When the Vehicle Ready to Drive warning light is on, it means your rechargeable hybrid vehicle is prepared to start driving. If the light goes out when you reach a speed of about 3 mph (5 km/h), it indicates normal operation. Similarly, the light coming on again when you stop the vehicle is expected behavior. If the light stays on after you switch off the motor and exit the vehicle, or if it behaves unexpectedly, consult your vehicle’s manual or contact a PEUGEOT Authorized Dealer or Authorized Service for further assistance.

Seat Unoccupied/Seat Belt Not Fastened

What Does Peugeot 408 Seat Unoccupied/Seat Belt Not Fastened Warning Mean?

The Seat Unoccupied/Seat Belt Not Fastened warning light is fixed and grey in color. This indicator appears when the ignition is on and one of the front or rear passenger seats is detected as unoccupied.

What Should I Do If the Seat Unoccupied/Seat Belt Not Fastened Warning Light Comes On in My Peugeot 408?

When the Seat Unoccupied/Seat Belt Not Fastened warning light is on, it indicates that the system has detected one of the passenger seats as unoccupied. This is a normal function of the vehicle’s safety system. If the seat is indeed unoccupied, no further action is required. However, if a seat is occupied and the warning light is on, ensure the passenger fastens their seat belt. If the issue persists, refer to your vehicle’s manual or contact a PEUGEOT Authorized Dealer or Authorized Service for assistance.

Seat Occupied/Seat Belt Fastened

What Does Peugeot 408 Seat Occupied/Seat Belt Fastened Warning Mean?

The Seat Occupied/Seat Belt Fastened warning light is fixed. This indicator appears when the ignition is on and the driver or a passenger has fastened their seat belt.

What Should I Do If the Seat Occupied/Seat Belt Fastened Warning Light Comes On in My Peugeot 408?

When the Seat Occupied/Seat Belt Fastened warning light is on, it means that the system has detected the driver or a passenger has correctly fastened their seat belt. This is a normal function indicating that the seat belt is properly secured. No further action is required when this light is on. If the light does not appear when a seat belt is fastened, refer to your vehicle’s manual or contact a PEUGEOT Authorized Dealer or Authorized Service for assistance.

Direction Indicators

What Does Peugeot 408 Direction Indicators Warning Mean?

The Direction Indicators warning light flashes along with an audible signal. This indicates that the direction indicators, or turn signals, are currently activated.

What Should I Do If the Direction Indicators Warning Light Comes On in My Peugeot 408?

When the Direction Indicators warning light flashes, it signifies that your turn signals are in use. This is a standard function of your vehicle to alert others on the road of your intended direction change. No additional action is required when this light is on. However, if the indicators do not flash or if you notice any irregularities, consult your vehicle’s manual or contact a PEUGEOT Authorized Dealer or Authorized Service for assistance.

Daytime Running Lamps/Sidelamps

What Does Peugeot 408 Daytime Running Lamps/Sidelamps Warning Mean?

The Daytime Running Lamps/Sidelamps warning light is fixed. This indicator shows that the daytime running lamps are on when there is adequate ambient light. Conversely, when the ambient light is inadequate, the sidelamps are activated.

What Should I Do If the Daytime Running Lamps/Sidelamps Warning Light Comes On in My Peugeot 408?

When the Daytime Running Lamps/Sidelamps warning light is on, it indicates that your vehicle’s lighting system is functioning as intended based on the surrounding light conditions. No further action is needed. If the lights do not adjust to the ambient light as described, refer to your vehicle’s manual or contact a PEUGEOT Authorized Dealer or Authorized Service for further assistance.

Dipped Beam Headlamps

What Does Peugeot 408 Dipped Beam Headlamps Warning Mean?

The Dipped Beam Headlamps warning light is fixed. This indicates that the dipped beam headlamps are currently turned on.

What Should I Do If the Dipped Beam Headlamps Warning Light Comes On in My Peugeot 408?

When the Dipped Beam Headlamps warning light is on, it means your vehicle’s dipped beam headlamps are activated, providing necessary illumination for driving. This is a normal function, and no further action is required. If the headlamps do not turn on when needed or if you experience any issues, consult your vehicle’s manual or contact a PEUGEOT Authorized Dealer or Authorized Service for assistance.

Peugeot 408 Warning Lamps: Night Vision

What Does Peugeot 408 Night Vision Warning Mean?

The Night Vision warning light can have two states: fixed grey and fixed. When the light is fixed grey, it means that the night vision function is activated but currently not available. When the light is fixed, it indicates that the night vision function is active and all conditions for its operation are met.

What Should I Do If the Night Vision Warning Light Comes On in My Peugeot 408?

When the Night Vision warning light is fixed grey, it signifies that the function is activated but not available at the moment. This might be due to specific conditions not being met. When the light is fixed, it means the night vision system is operational and providing enhanced visibility. For more detailed information on the system and its conditions, refer to the Lighting and Visibility section of your vehicle’s manual. If you encounter any issues or have concerns, contact a PEUGEOT Authorized Dealer or Authorized Service for assistance.

Peugeot Matrix LED Technology 2.0

What Does Peugeot 408 Matrix LED Technology 2.0 Warning Mean?

The Matrix LED Technology 2.0 warning light can display in two states: fixed grey and fixed. When the light is fixed grey, it indicates that the Matrix LED Technology 2.0 function is activated but currently not available because all the operating conditions have not been met. When the light is fixed, it means the function is active and the system is operating as intended.

What Should I Do If the Matrix LED Technology 2.0 Warning Light Comes On in My Peugeot 408?

When the Matrix LED Technology 2.0 warning light is fixed grey, it suggests that the function is activated but not available due to unmet operating conditions. Ensure that all conditions required for the system’s operation are fulfilled. When the light is fixed, it means the system is active and working correctly. For more detailed information on the system and its operating conditions, refer to the Lighting and Visibility section of your vehicle’s manual. If you experience any issues or have concerns, contact a PEUGEOT Authorized Dealer or Authorized Service for further assistance.

Automatic Headlamp Dipping

What Does Peugeot 408 Automatic Headlamp Dipping Warning Mean?

The Automatic Headlamp Dipping warning light is fixed. This indicates that the function has been activated via the touch screen and the lighting control stalk ring is set to the “AUTO” position.

What Should I Do If the Automatic Headlamp Dipping Warning Light Comes On in My Peugeot 408?

When the Automatic Headlamp Dipping warning light is on, it signifies that the automatic headlamp dipping function is enabled and the system is set to automatically adjust the headlamps as needed. This is a normal function indicating the system is ready to operate. For more information and detailed instructions on this feature, refer to the Lighting and Visibility section of your vehicle’s manual. If you experience any issues or have concerns, contact a PEUGEOT Authorized Dealer or Authorized Service for assistance.

Main Beam Headlamps

What Does Peugeot 408 Main Beam Headlamps Warning Mean?

The Main Beam Headlamps warning light is fixed. This indicates that the main beam headlamps are currently turned on.

What Should I Do If the Main Beam Headlamps Warning Light Comes On in My Peugeot 408?

When the Main Beam Headlamps warning light is on, it means your vehicle’s main beam headlamps are activated, providing maximum illumination for driving. This is a normal function, and no further action is required. However, ensure to switch off the main beams when they are not needed to avoid dazzling other drivers. If the headlamps do not turn on when needed or if you experience any issues, consult your vehicle’s manual or contact a PEUGEOT Authorized Dealer or Authorized Service for assistance.

Foot on The Brake

What Does Peugeot 408 Foot on the Brake Warning Mean?

The Foot on the Brake warning light is fixed. This indicates that there is insufficient or no pressure on the brake pedal. It typically appears when the engine is running and you need to apply the brake before releasing the parking brake or moving out of mode P on an automatic gearbox.

What Should I Do If the Foot on the Brake Warning Light Comes On in My Peugeot 408?

When the Foot on the Brake warning light is on, ensure you apply sufficient pressure to the brake pedal. This is necessary before you can release the parking brake or shift out of mode P on an automatic gearbox. If the warning persists despite adequate pressure, consult your vehicle’s manual or contact a PEUGEOT Authorized Dealer or Authorized Service for assistance.

E-Save Function (Rechargeable hybrid)

What Does Peugeot 408 e-SAVE Warning Mean?

The e-SAVE warning light is fixed and is accompanied by the reserved function (Rechargeable hybrid) 1 electric range. This indicates that the e-SAVE function is activated.

What Should I Do If the e-SAVE Warning Light Comes On in My Peugeot 408?

When the e-SAVE warning light is on, it means the function is activated, preserving a specific range of electric power for later use. This is a normal function of your rechargeable hybrid vehicle. For more detailed information on how to use and manage the e-SAVE function, refer to your vehicle’s manual or the Lighting and Visibility section. If you have concerns or experience issues, contact a PEUGEOT Authorized Dealer or Authorized Service for assistance.

Peugeot 408 Warning Lamps are essential for safe and efficient driving. Each light provides valuable information about the status and health of your vehicle, helping you to address issues promptly and maintain optimal performance. For more detailed insights into the Peugeot 408, including its features and specifications, be sure to check out our Peugeot 408 Review. Additionally, if you own a hybrid version of this model and want to learn more about its engine, don’t miss our Peugeot 408 Hybrid Engine and Performance Review. Stay informed and enjoy a smooth driving experience with your Peugeot 408.

Check our Instagram for more!