Peugeot 308 Warning Lamps: Blue and Green Warnings

Welcome to our Peugeot 308 Warning Lamps review. Understanding the various warning lamps on your Peugeot 308 is essential for maintaining your vehicle’s performance and ensuring your safety on the road. This guide will help you recognize and respond to different warning lights, such as the Stop & Start system, Vehicle Ready to Drive, and Seat Belt indicators. By familiarizing yourself with these lamps, you can take appropriate actions and keep your vehicle running smoothly. Let’s dive into the details of each warning lamp and what they mean for your driving experience.

Peugeot 308 Warning Lamps: Stop & Start Warning

What Does the Peugeot 308 Stop & Start Warning Mean?

The Stop & Start system in the Peugeot 308 is designed to help reduce fuel consumption and emissions. When the vehicle comes to a stop, the system automatically puts the engine into STOP mode. If the warning light is fixed, it indicates the system is activated and functioning as expected. If the light is flashing, it signifies that the STOP mode is temporarily unavailable, or the START mode has been automatically triggered.

What Should I Do If the Stop & Start Warning Light Comes On in My Peugeot 308?

If the Stop & Start warning light stays fixed, there is no immediate action required; the system is engaged properly. However, if the light begins to flash, it suggests a temporary issue with the system’s functionality. Continue driving normally but be aware that the system may not save fuel as efficiently until the issue is resolved. 

For detailed troubleshooting and information on this feature, refer to the “Driving” section of your vehicle’s owner manual.

Vehicle Ready to Drive Warning

What Does the Peugeot 308 Vehicle Ready to Drive Warning Mean?

The “Vehicle Ready to Drive” warning lamp in the Peugeot 308, specifically for rechargeable hybrid or electric models, serves as an indicator that the vehicle is prepared for operation. Accompanied by an audible signal upon activation, this warning assures that the vehicle is ready to be driven. For electric vehicles, this also indicates that the thermal comfort systems are operational. The indicator lamp typically extinguishes once the vehicle reaches a speed of approximately 3 mph (5 km/h) and will light up again when the vehicle ceases movement. The lamp turns off when you switch off the engine and exit the vehicle.

What Should I Do If the Vehicle Ready to Drive Warning Light Comes On in My Peugeot 308?

When the “Vehicle Ready to Drive” warning light illuminates and is accompanied by an audible signal, it means your vehicle is set and safe to drive. No specific action is required from the driver as this is a standard notification feature indicating that all systems are operational. Simply proceed with your drive as planned. Remember, the light will turn off as you start moving and reactivate upon stopping, serving as a handy reminder of the vehicle’s readiness status.

Seat Unoccupied/Seat Belt Not Fastened Warning

What Does the Peugeot 308 Seat Unoccupied/Seat Belt Not Fastened Warning Mean?

In the Peugeot 308, the seat unoccupied/seat belt not fastened warning lamp is a safety feature indicated by a fixed, grey light. This light turns on when the ignition is activated and signals that one of the front or rear passenger seats is considered to be unoccupied. This feature is particularly useful in reminding drivers and passengers to check seat occupancy and belt status before commencing a journey.

What Should I Do If the Seat Unoccupied/Seat Belt Not Fastened Warning Light Comes On in My Peugeot 308?

When the seat unoccupied/seat belt not fastened warning illuminates, it’s important to verify whether all passengers have fastened their seat belts properly. If a seat is empty, ensure that any objects placed on the seat are removed or secured elsewhere if they are triggering the sensor. 

This warning helps ensure that all passengers are safe and secure before driving. If the light remains on despite no apparent reason, it could indicate a sensor malfunction, in which case you should consult a PEUGEOT authorized service center for assistance.

Seat Occupied/Seat Belt Fastened Warning

What Does the Peugeot 308 Seat Occupied/Seat Belt Fastened Warning Mean?

The “Seat Occupied/Seat Belt Fastened” warning lamp in the Peugeot 308 is a critical safety feature that lights up as a fixed indicator when the ignition is on. This warning confirms that either the driver or a passenger has securely fastened their seat belt. It serves as a positive indication that the vehicle’s safety protocols are being adhered to, ensuring that all occupants are properly secured.

What Should I Do If the Seat Occupied/Seat Belt Fastened Warning Light Comes On in My Peugeot 308?

If the “Seat Occupied/Seat Belt Fastened” warning light is illuminated, it simply indicates that the seat belts are properly fastened for the occupied seats. No action is required from the driver or passengers as this is a confirmation of correct safety behavior. 

Always ensure that this light is on for all occupied seats before and while driving to maintain optimal safety standards. If the light does not illuminate when a seat belt is fastened, check the belt’s integrity and connection, and consult a PEUGEOT authorized service center if issues persist.

Direction Indicators

What Does the Peugeot 308 Direction Indicators Warning Mean?

The direction indicators warning in the Peugeot 308 activates as a flashing light accompanied by an audible signal. This warning is straightforward—it indicates that the direction indicators (turn signals) of the vehicle are currently engaged. This feature is crucial for signaling intentions to turn or change lanes to other drivers on the road, enhancing both communication and safety.

What Should I Do If the Direction Indicators Warning Comes On in My Peugeot 308?

When the direction indicators warning illuminates and you hear the accompanying audible signal, it means you have activated the turn signals. Ensure this is intentional and corresponds with your driving actions, such as turning or switching lanes. If the indicators are flashing and you did not activate them, or they continue to flash after you have completed a turn or lane change, check to see if the lever is properly returned to the off position. 

If the signals remain active without input or fail to engage when needed, there might be an issue with the indicator system. In such cases, it is advisable to have the vehicle inspected by a PEUGEOT authorized service center to address any potential faults.

Daytime Running Lamps/Sidelamps

What Do the Peugeot 308 Daytime Running Lamps/Sidelamps Indicators Mean?

In the Peugeot 308, the daytime running lamps and sidelamps indicators are signified by a fixed light on the dashboard. These lights serve different purposes based on the ambient lighting conditions. When there is adequate ambient light, the daytime running lamps are activated to improve the visibility of your vehicle to others during the day. Conversely, in conditions of inadequate ambient light, such as at dusk, dawn, or in poor weather, the sidelamps automatically turn on to enhance visibility and safety.

What Should I Do If the Daytime Running Lamps/Sidelamps Indicator Comes On in My Peugeot 308?

When the indicator for the daytime running lamps or sidelamps is lit, it indicates that the appropriate lights are functioning based on the surrounding light conditions. No action is typically required from you as the driver since these systems are designed to operate automatically for enhanced safety and compliance with traffic regulations. However, it’s always a good practice to visually confirm that the correct lights are active, especially when transitioning between different lighting environments. 

If you notice that the lights do not switch according to changes in ambient light, or if the indicator does not reflect the actual status of the lamps, consult a PEUGEOT authorized service center to ensure the lighting system is functioning correctly.

Dipped Beam Headlamps

What Does the Peugeot 308 Dipped Beam Headlamps Warning Mean?

The dipped beam headlamps warning in the Peugeot 308 is represented by a fixed light on the dashboard, indicating that the dipped beam headlamps are currently active. Dipped beam headlamps, also known as low-beam headlamps, are designed to provide adequate road illumination for nighttime driving or during poor visibility conditions without blinding other drivers.

What Should I Do If the Dipped Beam Headlamps Warning Comes On in My Peugeot 308?

When the dipped beam headlamps warning light is illuminated, it confirms that your vehicle’s low-beam headlights are on. This is typically necessary during night driving, or under conditions of reduced visibility, such as fog or heavy rain. No immediate action is required if this light activates while you’re driving under these conditions. However, ensure that you switch to dipped beams from full beams when encountering traffic to avoid dazzling other drivers. 

If the dipped beams are on unexpectedly, ensure you adjust your vehicle’s headlamp settings appropriately for the current driving conditions. If the light remains on or fails to activate when needed, this could indicate an issue with the headlamp system, and you should have it checked by a professional at a PEUGEOT authorized service center.

Peugeot Matrix LED Technology 2.0

What Does the Peugeot 308 Matrix LED Technology 2.0 Warning Mean?

The Peugeot 308 Matrix LED Technology 2.0 warning features a fixed, grey light on the dashboard and serves two distinct purposes, depending on the context. When illuminated, it indicates that the advanced Matrix LED headlight system is activated. There are two scenarios:

Function Activated but Not Available: This status means that while the Matrix LED function is turned on, it is not currently operational because not all necessary conditions have been met.

Function Active and Operating: This indicates that the Matrix LED system is fully active and functioning as all required conditions for operation have been met.

What Should I Do If the Peugeot 308 Matrix LED Technology 2.0 Warning Comes On?

When the function is activated but not available: Check that all prerequisites for the Matrix LED system are met. This may include environmental conditions or specific settings adjustments. For example, certain systems may only operate above a specific speed or during specific ambient lighting conditions.

When the function is active and operating: No action is needed from you as the driver since this indicates that the system is functioning correctly, providing optimal lighting automatically based on the road conditions and surrounding traffic.

For both scenarios, if there is uncertainty about why the system is not functioning as expected or if the indicators do not match the expected behavior, refer to the “Lighting and Visibility” section of your vehicle’s owner manual for detailed instructions and troubleshooting. If problems persist, contact a PEUGEOT authorized service center for professional assistance.

Automatic Headlamp Dipping

What Does the Peugeot 308 Automatic Headlamp Dipping Warning Mean?

The Automatic Headlamp Dipping warning in the Peugeot 308 is represented by a fixed light on the dashboard, indicating that the automatic headlamp dipping feature has been activated. This system automatically adjusts the headlamp beam from high to low based on the road conditions and the presence of other vehicles to prevent dazzling other drivers. The warning light signifies that the function has been activated via the touch screen and that the lighting control stalk ring is set to the “AUTO” position.

What Should I Do If the Automatic Headlamp Dipping Warning Comes On in My Peugeot 308?

When the Automatic Headlamp Dipping warning light is illuminated, it confirms that the feature is activated and ready to function automatically. Ensure that the lighting control stalk ring remains in the “AUTO” position to allow the system to operate as intended. This feature is particularly useful during nighttime driving or in varying light conditions where manual adjustment of headlamp beams might be cumbersome.

No specific action is needed from you as long as the system is activated and functioning correctly. However, it’s a good practice to occasionally verify that the automatic adjustment is performing adequately by observing the changes in the headlamp beams in response to traffic and lighting conditions. For more detailed information or troubleshooting, refer to the “Lighting and Visibility” section of your vehicle’s owner manual. If you notice that the system is not working as it should, consider visiting a PEUGEOT authorized service center for assistance.

Main Beam Headlamps

What Does the Peugeot 308 Main Beam Headlamps Warning Mean?

The main beam headlamps warning in the Peugeot 308 is indicated by a fixed light on the dashboard, signaling that the main beam headlamps, also known as high beams, are currently active. These headlamps provide enhanced illumination over a greater distance than standard dipped beams, making them ideal for driving in areas with little to no other ambient lighting, such as rural roads at night.

What Should I Do If the Main Beam Headlamps Warning Comes On in My Peugeot 308?

When the main beam headlamps warning illuminates, it means your vehicle’s high beams are on. Use the main beams judiciously to ensure you do not blind oncoming traffic. Remember to switch back to dipped beams when approaching or following other vehicles closely. Also, revert to dipped beams in well-lit urban areas where high beams are unnecessary and could impair other drivers’ vision.

If you did not intentionally activate the main beams or if they remain on when you attempt to switch to dipped beams, check the operation of your headlamp switch. If issues with switching between beam modes persist, there may be a malfunction within the headlamp system, and it would be advisable to have your vehicle checked by a professional at a PEUGEOT authorized service center.

Peugeot 308 Warning Lamps: Foot on The Brake

What Does the Peugeot 308 Foot on the Brake Warning Mean?

The “Foot on the Brake” warning light in the Peugeot 308 is a fixed indicator on the dashboard. It serves as a reminder or alert that there is insufficient or no pressure being applied to the brake pedal. This warning typically activates with the engine running, especially before releasing the parking brake or when attempting to move out of mode P (Park) in vehicles equipped with an automatic gearbox or a drive selector.

What Should I Do If the Foot on the Brake Warning Comes On in My Peugeot 308?

When the “Foot on the Brake” warning light is illuminated, you should ensure that you are pressing the brake pedal firmly. This action is often necessary to safely disengage the parking brake or to shift the vehicle out of Park mode. It’s a crucial safety feature designed to prevent the vehicle from moving unexpectedly.

Check Your Actions: Ensure that your foot is properly placed on the brake pedal and applying sufficient pressure.

Check the Brake Pedal: If you are pressing the brake and the warning remains illuminated, there might be an issue with the brake pedal sensor or the braking system itself.

Refer to the Manual: If unsure about the procedures or the warning persists, consult the vehicle’s owner manual for more detailed instructions under the braking system section.

Seek Professional Help: If the problem continues despite correct action, this could indicate a more serious issue with the braking system. In such cases, it is advisable to have the vehicle inspected at a PEUGEOT authorized service center to ensure safety and proper functionality.

e-SAVE Function (Rechargeable hybrid)

What Does the Peugeot 308 e-SAVE Function Warning Mean?

The e-SAVE function warning in the Peugeot 308, specifically for rechargeable hybrid models, is indicated by a fixed light on the dashboard. This light is accompanied by a display showing the reserved electric range. The e-SAVE function allows drivers to conserve electric energy in the battery for later use, based on their preference. When activated, it maintains a predetermined amount of battery charge to be used when desired, such as for driving in electric-only zones or more efficient use in urban settings.

What Should I Do If the e-SAVE Function Warning Comes On in My Peugeot 308?

When the e-SAVE function warning illuminates, it signifies that the function is active and is currently reserving a portion of the vehicle’s electric range:

Verify Activation: Check that you have intentionally activated the e-SAVE function through your vehicle’s system settings. It should show how much electric range has been reserved.

Manage Usage: Plan your trip accordingly, knowing that part of the battery’s charge is being conserved for later use. This can affect the available driving range if you’re relying on electric power for immediate travel.

Adjust Settings if Needed: If the e-SAVE function is not needed or you wish to utilize more of the battery’s capacity for immediate driving needs, you can deactivate or adjust the settings directly from your vehicle’s interface.

Monitor Battery Levels: Keep an eye on the battery level and the reserved range to ensure that your driving needs align with the available electric power.

If you encounter any issues with the e-SAVE function or the reserved range does not display correctly, refer to the “Energy Management” section of your vehicle’s owner manual for troubleshooting steps or visit a PEUGEOT authorized service center for professional assistance.

Peugeot 308 Warning Lamps play a vital role in keeping your vehicle running smoothly and safely. Familiarizing yourself with these warning lamps and understanding the appropriate responses can help you address any issues promptly. Regularly consulting your vehicle’s owner manual can provide additional insights and troubleshooting tips.

For more detailed information about the Peugeot 308, check out our comprehensive Peugeot 308 Review where we delve into all the features and capabilities of this versatile vehicle. If you own a hybrid version of the Peugeot 308, you might find our Peugeot 308 Hybrid Engine and Performance Review particularly useful. It provides an in-depth look at the performance and efficiency of the petrol engine models. Safe driving!

Check our Instagram for more!