How to Check Peugeot 408 Warning Lights?

Welcome to our Peugeot 408 Warning Lights review, where we break down the essential information you need to keep your vehicle running smoothly and safely. Understanding the various warning lights and indicators on your Peugeot 408’s dashboard is crucial for maintaining optimal performance and addressing any issues promptly. In this guide, we’ll walk you through the key warning lights, their meanings, and what actions you should take if they appear. Whether you’re driving a petrol or rechargeable hybrid model, this review will equip you with the knowledge to confidently navigate your Peugeot 408’s warning systems.

Peugeot 408 Warning Lights: Total Distance Recorder

What Does the Total Distance Recorder Mean in the Peugeot 408?

The total distance recorder keeps a cumulative record of all the miles or kilometers your Peugeot 408 has traveled since its initial registration. This information is crucial for understanding your vehicle’s usage, planning maintenance, and even determining the vehicle’s resale value.

How Is the Total Distance Displayed in the Peugeot 408?

The total distance is displayed on the instrument panel under specific conditions:

1. Ignition On:

The total distance is always visible when the ignition is turned on. This allows you to easily check the vehicle’s mileage at any time.

2. After Ignition Off:

The total distance remains displayed for 30 seconds after the ignition is switched off, providing a brief window to review the mileage before leaving the vehicle.

3. When Accessing the Vehicle:

The total distance automatically appears when the driver’s door is opened or when the vehicle is locked or unlocked. This ensures you are always informed about the vehicle’s mileage when entering or exiting the car.

How to Change Distance Units in the Peugeot 408?

If you find yourself driving in a different country where the official unit of distance differs from your current setting, you may need to change the distance units (miles or kilometers) displayed on your Peugeot 408.

1. Go to the configuration settings on your vehicle’s touch screen.
2. Within the settings, find the option for units or measurements.
3. Select the desired unit (miles or kilometers) to match the local country’s official measurement standard (mph or km/h).
4. Ensure that the vehicle is stationary when making this change to avoid distractions while driving.

Special Note for Rechargeable Hybrid Vehicles

For Peugeot 408 rechargeable hybrid vehicles, the total distance recorder is only accessible via the trip computer. This may require navigating through the trip computer menu to find the total distance traveled.

Using the Trip Computer in Rechargeable Hybrids:

1. Navigate to the trip computer via the touch screen or instrument panel controls.
2. Look for the section that displays the total distance traveled.
3. For more detailed instructions on using the trip computer, consult the corresponding section in your vehicle’s manual.

Why Is the Total Distance Recorder Important?

The total distance recorder plays a crucial role in managing your vehicle’s overall health and performance. Here’s why it’s important:

1. Maintenance Scheduling:

Many maintenance tasks are scheduled based on mileage. Keeping track of the total distance helps you ensure that services like oil changes, tire rotations, and brake inspections are performed on time.

2. Resale Value:

The total distance traveled is a key factor in determining the resale value of your vehicle. Lower mileage generally correlates with a higher resale value.

3. Vehicle History:

The total distance recorder provides a clear record of the vehicle’s usage, which can be important for tracking wear and tear over time.

Lighting Dimmer

What Does the Lighting Dimmer Mean in the Peugeot 408?

The lighting dimmer feature in your Peugeot 408 is designed to provide optimal visibility and comfort while driving by allowing you to adjust the brightness of the dashboard and control panel. This can be particularly useful when driving at night or in low-light conditions, where overly bright instruments might cause discomfort or reduce visibility.

How to Adjust the Lighting Dimmer in the Peugeot 408?

Adjusting the brightness of your vehicle’s instruments and controls is a simple process that can be done through the touch screen interface. Follow these steps to customize the interior lighting to your liking:

1. Access the Settings Menu

Start by navigating to the Settings menu on your Peugeot 408’s touch screen.

2. Open the Brightness Application

Within the Settings menu, find and select the Brightness application. This is where you can control various lighting aspects of your vehicle.

3. Adjust the Lighting in the “Cockpit” Category

1. In the Brightness application, locate the “Cockpit” category. This section specifically controls the brightness of the dashboard instruments and control panels.
2. Press or move the slider to adjust the brightness level. Slide it to the right to increase brightness or to the left to decrease it, depending on your preferences and the current driving conditions.

4. Confirm the Setting

Once you’ve adjusted the brightness to your desired level, the setting will typically be saved automatically. You can then exit the menu and continue driving with your preferred lighting.

Why Is the Lighting Dimmer Important?

The lighting dimmer in your Peugeot 408 plays an essential role in enhancing your driving experience. Here’s why it’s important:

1. Improved Visibility:

Adjusting the brightness of your dashboard and controls ensures that all essential information is visible without being too bright or too dim, which can affect your focus while driving.

2. Comfortable Driving:

Proper lighting reduces eye strain, particularly during night driving. By customizing the brightness, you can create a more comfortable environment in the vehicle.

3. Adaptability to Different Conditions:

The ability to adjust the lighting means you can quickly adapt to changing light conditions, whether it’s transitioning from day to night or driving through a tunnel.

Trip Computer

What Does the Trip Computer Mean in the Peugeot 408?

The trip computer in your Peugeot 408 is designed to give you real-time data about various aspects of your trip. This feature helps you make informed decisions while driving, such as when to refuel or how to adjust your driving style to improve fuel efficiency. By providing detailed information on range, fuel consumption, and average speed, the trip computer ensures that you have everything you need for a safe and efficient drive.

What Information Does the Trip Computer Display in the Peugeot 408?

The trip computer in your Peugeot 408 displays several key pieces of information that are vital for managing your trip effectively. Here’s a breakdown of the data you can expect to see:

Range

1. The range indicator shows the estimated distance you can travel with the remaining fuel in the tank. This estimate is based on your recent driving habits and current fuel level, providing a useful gauge of how far you can go before needing to refuel.
2. The range adjusts dynamically as you drive, taking into account factors like fuel consumption, speed, and driving conditions. This allows you to plan your refueling stops more accurately.

Fuel Current Consumption

1. The trip computer displays the amount of fuel being used over a certain distance, typically shown as miles per gallon (mpg) or liters per 100 kilometers (l/100 km). This real-time data helps you understand how efficiently your vehicle is using fuel during your trip.
2. In addition to current consumption, the trip computer also provides an average fuel consumption figure for the entire trip. This gives you an overview of your vehicle’s fuel efficiency over the course of the journey.
3. By monitoring fuel consumption, you can adjust your driving style to improve efficiency, such as by reducing speed or avoiding rapid acceleration.

Average Speed

1. The trip computer calculates and displays the average speed maintained during your trip. This information is useful for understanding how driving conditions and traffic have affected your journey.
2. Knowing your average speed can help you estimate your arrival time and make adjustments to your driving if necessary. For example, if your average speed is lower than expected due to traffic, you might need to account for a longer travel time.

How to Use the Trip Computer in the Peugeot 408?

Using the trip computer effectively can enhance your driving experience and help you manage your vehicle’s performance:

1. Keep an eye on the range indicator to avoid running out of fuel unexpectedly. Plan your refueling stops based on the range displayed.
2. Use the current and average fuel consumption data to adjust your driving style for better fuel efficiency. Smooth driving, maintaining a steady speed, and avoiding heavy acceleration can all contribute to lower fuel consumption.
3. Review your average speed at the end of the trip to understand how efficiently you’ve driven. This can help you make improvements for future journeys.

Data Displayed On The Instrument Panel

What Data Is Displayed on the Instrument Panel in Peugeot 408?

The instrument panel in your Peugeot 408 provides a variety of essential information to keep you informed about your vehicle’s performance and journey details.

How to Display Different Tabs on the Instrument Panel in Peugeot 408?

To cycle through the different tabs, press the button located on the end of the wiper control stalk. The following tabs will be displayed in turn:

Current Information

Current Consumption (Petrol): Displays the current fuel consumption for petrol engines.

Time Counter for Stop & Start (Petrol): Shows the time the Stop & Start system has been active.

Percentage of Current Journey in All-Electric Mode (Rechargeable Hybrid): Indicates the percentage of the current journey traveled in electric mode.

Total Distance Recorder (Rechargeable Hybrid): Displays the total distance traveled by the vehicle.

Trips “1” and “2”

Each trip tab displays the following information:

Average Speed: The average speed maintained during the trip.

Average Fuel Consumption: The average fuel consumption over the trip.

Distance Travelled: The total distance covered during the trip.

These displays provide a comprehensive overview of your driving performance and help you manage your vehicle’s efficiency effectively.

Trip Reset

How to Reset the Trip in the Peugeot 408?

Resetting the trip data in your Peugeot 408 is simple and can be done directly from the instrument panel. Here’s how you can reset the trip information:

Steps to Reset the Trip in the Peugeot 408

Start by displaying the trip you wish to reset. Your Peugeot 408 has two independent trip meters, “Trip 1” and “Trip 2.”

1. To select the desired trip, press the button located at the end of the wiper control stalk. This button cycles through the available trip displays, allowing you to choose which trip to reset.
2. Once the desired trip (“Trip 1” or “Trip 2”) is displayed on the instrument panel, press and hold the same button located on the end of the wiper control stalk.
3. Hold the button for more than 2 seconds. You will notice that the trip data (such as distance traveled, average speed, and fuel consumption) resets to zero, indicating that the trip has been successfully reset.

Independent Trips for Flexible Tracking

Trip 1 and Trip 2:

1. The Peugeot 408 features two independent trip meters, “Trip 1” and “Trip 2.” Each trip meter can be reset and used separately, allowing you to track different journeys or time periods independently.
2. This flexibility is particularly useful for drivers who want to compare different segments of a journey, monitor daily versus long-term driving habits, or separate business and personal travel.

Use Cases for Independent Trips:

Trip 1: You might use this trip meter for daily commuting, resetting it each day to monitor your daily fuel consumption and distance.

Trip 2: This trip meter could be used for longer journeys or to track a specific trip over several days, providing cumulative data without affecting your daily measurements.

Why Is Trip Reset Important?

Resetting the trip data in your Peugeot 408 is important for several reasons:

1. Accurate Monitoring:

By resetting the trip meter, you ensure that the data you collect is relevant to the specific journey you’re tracking. This helps in maintaining accurate records of fuel consumption, distance traveled, and average speed.

2. Comparative Analysis:

Using the independent trip meters, you can compare different trips or driving conditions, such as city versus highway driving, to see how they affect fuel efficiency and overall vehicle performance.

3. Personalized Tracking:

Whether you’re tracking business mileage for expense reporting or monitoring your fuel efficiency over a long road trip, resetting the trip meters allows you to tailor the data to your specific needs.

Peugeot 408 Warning Lights: Definitions

Definitions of Trip Computer Metrics in Peugeot 408

Understanding the various metrics displayed on your Peugeot 408’s trip computer helps you monitor and optimize your driving performance. Here are the key definitions:

Range (Miles or km)

The range indicates the distance that can still be traveled with the remaining fuel in the tank. This value is based on the average fuel consumption over the last few miles or kilometers traveled. It can vary significantly due to changes in driving style or terrain.

1. When the range falls below 19 miles (30 km), dashes are displayed.
2. After refueling with at least 5 liters of fuel, the range is recalculated and displayed if it exceeds 62 miles (100 km).
3. If dashes appear permanently instead of numbers while driving, this indicates a malfunction. Consult a PEUGEOT dealer or a qualified workshop.

Current Consumption (mpg or l/100 km or km/l)

The current consumption is calculated during the last few seconds of driving. This function is only displayed at speeds above 19 mph (30 km/h).

Average Consumption (mpg or l/100 km or km/l)

The average consumption is calculated since the last trip computer reset, providing an overall view of fuel efficiency over a trip.

Average Speed (mph or km/h)

The average speed is calculated since the last trip computer reset, showing the average speed maintained during the trip.

Distance Travelled (Miles or km)

The distance traveled is calculated since the last trip computer reset, indicating the total distance covered during the trip.

Stop & Start Time Counter (Minutes/Seconds or Hours/Minutes)

If your vehicle is fitted with the Stop & Start function, a time counter calculates the time spent in STOP mode during a journey. The time counter is reset each time the ignition is switched on, providing a fresh measurement for each journey.

10-Inch Touch Screen

What Does the 10-Inch Touch Screen Provide in Peugeot 408?

The 10-inch touch screen in your Peugeot 408 offers access to a wide range of features and settings, enhancing both the convenience and functionality of your vehicle.

What Elements Are Accessible via the 10-Inch Touch Screen in Peugeot 408?

Time and Exterior Temperature:

Displays the current time and outside temperature.

Heating/Air Conditioning System:

Controls and reminders of heating and air conditioning settings.

Driving Aid, Comfort, and Safety Functions:

Settings for driving aid functions, comfort, and safety features.

Settings for the audio equipment and digital instrument panel.

Rechargeable Hybrid Vehicle Functions:

Specific settings for hybrid vehicles.

Visual Manoeuvring Aid Functions:

Display and control of parking and maneuvering aids.

Interactive Handbook:

Access to the interactive vehicle handbook.

Video Tutorials:

Tutorials on screen management, driving aids, and voice recognition.

Audio Equipment and Telephone Controls:

Controls and display of audio equipment and phone information.

Connected Services:

Access and display of connected services information.

Navigation System:

Controls and display of navigation information (depending on equipment).

Voice Recognition:

Access to voice recognition features (depending on equipment).

Important Safety Note

For safety reasons, always stop the vehicle before performing operations that require sustained attention. Some functions are not accessible while driving to ensure your safety and the safety of others.

10-Inch Touch Screen Recommendations

What Are The Recommendations for Using the Touch Screen and i-Toggles in Peugeot 408?

To ensure the longevity and proper functioning of the touch screen and i-Toggles in your Peugeot 408, follow these recommendations:

General Usage Tips

1. Capacitive Touch Screens:

The touch screen and i-Toggles are capacitive, meaning they respond to touch from your fingers or a compatible stylus.

2. Avoid Pointed Objects:

Do not use pointed objects on the touch screen to prevent damage.

3. Dry Hands Only:

Do not touch the touch screen with wet hands to avoid malfunction or damage.

What Are The Peugeot 408 Cleaning Instructions?

1. Soft, Clean Cloth:

Use a soft, clean cloth to clean the touch screen. Avoid using abrasive materials that could scratch or damage the screen.

By following these recommendations, you can help maintain the performance and durability of the touch screen and i-Toggles in your Peugeot 408.

Touch Screen Main Controls

The touch screen in your Peugeot 408 offers a range of controls to enhance your driving experience. Here are the main functions and how to access them:

How to Access Home Pages and Applications in Your Peugeot 408 Touch Screen?

1. Access to One of the Home Pages: Navigate to any of the available home pages on the touch screen.
2. Return to the First Home Page: Quickly return to the primary home page from any screen.
3. Direct Access to the Climate Application: Open the climate control application directly for quick adjustments.

4. Direct Access to Shortcuts for Driving Aids: Quickly access shortcuts for driving aids for immediate use.

Quick Settings and Navigation

1. Swipe Down for Quick Settings: Swipe down from the upper edge of the touch screen to access quick settings such as Brightness and Diagnostics.
2. Scroll Text by Swiping: Depending on the displayed pages, scroll through text by swiping with your finger, similar to using a smartphone.

Function Controls

1. Show/Hide Context Menu: Toggle the display of the context menu.

2. Return to the Previous Page: Navigate back to the previous page.
3. Change Function Status: Press the description for the corresponding line to activate/deactivate a function. This is confirmed by the slider moving right (activated) or left (deactivated).
4. Access Additional Information: Obtain more details about a specific function.

5. Access Function Parameters: Open the settings for various functions to customize them.

Managing Shortcuts

1. Adding/Removing Shortcuts: Customize the touch screen by adding or removing shortcuts to frequently used functions.

Audio and System Controls

1. Short Press with Ignition Off: Turn the system on or off with a short press.
2. Short Press with Ignition On: Mute or restore the sound with a short press.
3. Long Press with Ignition On: Enter standby mode (mute sound, screens off, clock display off) with a long press.
4. Rotation: Adjust the volume by rotating the control knob.

By mastering these controls, you can efficiently navigate and utilize the touch screen features in your Peugeot 408, making your driving experience more convenient and enjoyable.

Applications

What Are The Applications in Peugeot 408?

The applications wall in your Peugeot 408 provides quick access to a variety of functions to enhance your driving experience. Here’s how you can access and use these applications:

Accessing the Applications Wall

1. Press the Button:

Press the dedicated button to access the applications wall.

2. Three-Finger Touch:

From any page, press the touch screen with three fingers to display the applications wall.

For detailed information about other applications not listed here, refer to the sections describing the audio and telematic systems.

Key Applications and Their Functions

1. ADAS (Advanced Driver Assistance Systems):

Activation/Deactivation and configuration of the driving aid functions to enhance safety and convenience while driving.

2. Climate:

• Settings for temperature, air flow, and other climate control features.
• For more information on dual-zone automatic air conditioning, refer to the corresponding section.
• Activation/Deactivation of the heated steering wheel.
• For more information on the heated steering wheel, refer to the corresponding section.

3. Seats:

• Activation/Deactivation and configuration of the seat comfort functions, including heating and massages.
• For more information on heated seats or multi-point massages, refer to the corresponding section.

4. Settings:

• Main settings for the audio system, touch screen, and digital instrument panel.
• Activation/Deactivation and configuration of the exterior lighting, vehicle access, and safety functions.

4. Energy:

• Access to the rechargeable hybrid system features, including energy flow, consumption statistics, deferred charging, and the e-SAVE function.

By familiarizing yourself with these applications, you can easily customize and control various aspects of your Peugeot 408, ensuring a comfortable and efficient driving experience.

Energy Application

What Does the Energy Application Do in the Peugeot 408?

The Energy application in your Peugeot 408 provides comprehensive insights and control over the rechargeable hybrid system, ensuring optimal energy management and efficiency.

What is Displayed on the Energy Flow Page in the Peugeot 408?

The Energy Flow page shows the real-time operation of the rechargeable hybrid system, including:

1. Active Driving Mode:

Indicates the current driving mode being used.

2. Petrol Engine:

Shows the status and activity of the petrol engine.

3. Electric Motor:

Displays the status and activity of the electric motor.

4. Traction Battery Charge Level:

Shows the current charge level of the traction battery.

Energy flows are color-coded:

Blue: 100% electrical energy.

White: Energy from the petrol engine.

Green: Energy recovery.

What Statistics are Shown on the Energy Application in the Peugeot 408?

The Statistics page provides electrical energy and fuel consumption data:

1. Average Electrical Consumption for the Current Trip (kWh/100 km):
   • Blue Graph: Energy consumed directly from the traction battery.
   • Green Graph: Energy regenerated during deceleration and braking phases used to recharge the traction battery.
2. Average Fuel Consumption for the Current Trip (l/100 km):
   • Displayed as an orange graph, showing historical fuel consumption values.

How Can I Program Deferred Charging in the Peugeot 408?

The Charging page allows you to program deferred charging. For more information on charging the traction battery, refer to the corresponding section in your manual.

What is the e-SAVE Function in the Peugeot 408?

The e-SAVE function allows you to reserve all or part of the electrical energy of the traction battery to be used later during a journey, such as when passing through an urban area or an area reserved for electric vehicles.

How to Activate e-SAVE:

Press ON, then select the electric range to be reserved (6 miles, 12 miles, or the full range MAX).

Confirmation:

Activation is confirmed by the lighting of an indicator lamp on the instrument panel and the indication of the energy reserve in miles or kilometers.

Using the Energy Reserve:

Choose the Electric driving mode in the mode selector. If the requested range exceeds the available range (not recommended), the internal combustion engine will start to recharge the traction battery up to the requested threshold, which may lead to excessive fuel consumption.

Peugeot 408 Warning Lights: i-Toggles

What is the i-Toggles System in the Peugeot 408?

The i-Toggles system in your Peugeot 408 is an additional touch screen associated with the PEUGEOT i-Connect Advanced, designed to provide a personalized display of shortcuts to applications or presets.

What Are the Default Shortcuts in the Peugeot 408 i-Toggles System?

By default, the i-Toggles system directs you to the main applications, including:

1. Media
2. Climate
3. Navigation
4. Phone
5. Mirror Screen

Can the Shortcuts in the i-Toggles System be Customized in the Peugeot 408?

Yes, the shortcuts can be replaced by personalized options such as:

1. Radio preset
2. Temperature preset
3. Pre-selected destination
4. Pre-selected contact
5. Pre-selected smartphone

What Should I Do if the i-Toggles Screen in the Peugeot 408 Becomes Very Hot?

If the vehicle is exposed to sunlight for an extended period, the touch screen can become very hot. Wait a few minutes before using the system to avoid potential issues.

Where Can I Find More Information About Personalization in the Peugeot 408 i-Toggles System?

For more information on Personalisation – i-Toggles, refer to the corresponding section for the Audio equipment and telematics systems in your vehicle’s manual.

Remotely Operable Additional Functions (Rechargeable Hybrid)

What Are the Remotely Operable Additional Functions in the Peugeot 408 Rechargeable Hybrid?

The Peugeot 408 Rechargeable Hybrid offers several remotely operable functions available through the MYPEUGEOT APP application, accessible from a smartphone. These functions enhance convenience and control over your vehicle.

What Functions Are Available Through the MYPEUGEOT APP?

The following functions are available from the MYPEUGEOT APP:

Managing the Traction Battery Charging:

Allows you to schedule and manage deferred charging of the traction battery.

Managing the Temperature Pre-Conditioning:

Enables you to pre-condition the vehicle’s temperature for comfort.

Viewing the State of Charge and Range:

Provides real-time information on the vehicle’s battery charge level and driving range.

How to Install the MYPEUGEOT APP in Your Peugeot 408?

To use these features, follow the installation procedure:

1. Download the MYPEUGEOT APP:

Obtain the app from the appropriate online store for your smartphone.

2. Create an Account:

Sign up for a new account within the app.

3. Enter the Vehicle Identification Number (VIN):

Input the VIN, available on the vehicle registration certificate.

For more information on Identification markings, refer to the corresponding section in your vehicle’s manual.

What Should I Do About Network Coverage for the MYPEUGEOT APP?

To ensure the proper functioning of the remotely operable features, make sure your vehicle is located in an area covered by the mobile network. A lack of network coverage may prevent communication with the vehicle, such as when it is in an underground car park. In such cases, the application will display a message indicating that the connection with the vehicle could not be established.

In conclusion, being familiar with the Peugeot 408 warning lights and their meanings is vital for ensuring your vehicle’s safety and performance. Peugeot 408 warning lights are categorized into three types: red, orange, and blue/green warnings. For a detailed guide on each type, refer to our comprehensive resources. Learn more about the Peugeot 408 indicators red warnings, Peugeot 408 indicators orange warnings, and Peugeot 408 warning lamps blue and green warnings. These guides offer in-depth insights into the performance and features of the Peugeot 408, helping you make informed decisions about your vehicle.

Check our Instagram for more!