Welcome to our Peugeot 3008 Warning Lamps review. Understanding the warning lamps on your Peugeot 3008 is crucial for maintaining your vehicle’s performance and safety. These indicators provide essential information about the car’s various systems, alerting you to potential issues that require attention. In this guide, we will explain what each warning lamp means and what actions you should take when they light up. From Blind Spot Monitoring to Automatic Headlamp Dipping, we’ll cover everything you need to know to keep your Peugeot 3008 running smoothly and safely.

Peugeot 3008 Warning Lamps: Blind Spot Monitoring

What Does Peugeot 3008 Blind Spot Monitoring Warning Mean?

Illuminates steadily. This warning indicates that the blind spot monitoring function has been activated. The system uses sensors located on the sides of the vehicle to monitor areas that are difficult for the driver to see, commonly referred to as blind spots. When the system detects a vehicle in your blind spot, it will alert you with this warning light to help prevent potential collisions during lane changes or merges.

What Should I Do If the Blind Spot Monitoring Warning Light Comes On in My Peugeot 3008?

When the blind spot monitoring warning light comes on, it signifies that the system is actively monitoring your vehicle’s blind spots. This is a normal function and indicates that the system is ready to alert you to any vehicles that may be in these areas.

Continue to drive as usual but be aware that the system is now providing an extra layer of safety by detecting vehicles you might not see. It’s essential to still use your side and rearview mirrors and perform shoulder checks before changing lanes or merging, as the blind spot monitoring system is a supplementary tool and not a substitute for careful driving practices. If the system detects a vehicle in your blind spot, it will provide a visual alert, and in some cases, an audible warning. Paying attention to these alerts can greatly enhance your safety on the road by preventing accidents that can occur from unseen vehicles in your blind spots.ç

Hill Assist Descent Control

What Does Peugeot 3008 Hill Assist Descent Control Mean?

Illuminates steadily when the function has been activated, but the conditions for regulation are not met (gradient, gear engaged). Flashes when the function is actively regulating the speed of the vehicle. The vehicle is being braked, and the brake lamps come on during the descent.

What Should I Do If the Hill Assist Descent Control Light Comes On in My Peugeot 3008?

If the Hill Assist Descent Control light is on steadily, it means the function is ready but the necessary conditions for its operation are not met. Ensure you are on a suitable gradient and the correct gear is engaged. When the light is flashing, the system is actively controlling your speed during a descent. Allow the system to manage your speed and braking. If you encounter any issues or the light behaves unexpectedly, have the system inspected by a PEUGEOT Authorized Dealer or Authorized Service.

Stop & Start

What Does Peugeot 3008 Stop & Start Warning Mean?

Illuminates steadily when the vehicle stops, indicating that the Stop & Start system has put the engine into STOP mode. Flashes temporarily when STOP mode is momentarily unavailable or START mode is automatically triggered.

What Should I Do If the Stop & Start Warning Light Comes On in My Peugeot 3008?

If the Stop & Start light is on steadily, it means the system has successfully put the engine into STOP mode when the vehicle is stationary. No action is required as this is a normal function. If the light flashes temporarily, it indicates that STOP mode is not currently available or that the engine has been automatically restarted. This can occur for various reasons, such as battery charge levels or engine temperature. For detailed information, refer to the Driving section of your vehicle’s manual. If the system does not behave as expected, consult a PEUGEOT Authorized Dealer or Authorized Service.

Vehicle Ready To Drive (Rechargeable hybrid)

What Does Peugeot 3008 Vehicle Ready to Drive (Rechargeable Hybrid) Warning Mean?

Illuminates steadily, accompanied by an audible signal when it comes on. This indicates that the vehicle is ready to drive. The indicator lamp goes out upon reaching a speed of approximately 3 mph (5 km/h) and lights up again when the vehicle stops moving. The lamp will go out when you turn off the engine and exit the vehicle.

What Should I Do If the Vehicle Ready to Drive Light Comes On in My Peugeot 3008?

If the Vehicle Ready to Drive light is on, it means your rechargeable hybrid is ready to drive. You can proceed with driving as usual. The light will turn off once you reach a speed of around 3 mph (5 km/h) and will come back on when you stop. This is normal behavior. When you turn off the engine and exit the vehicle, the light will go out. If you notice any irregularities or if the light does not behave as described, have the system checked by a PEUGEOT Authorized Dealer or Authorized Service.

Lane Positioning Assist

What Does Peugeot 3008 Lane Positioning Assist Warning Mean?

Illuminates steadily when the function has been activated and all conditions have been met, indicating that the system is operating correctly.

What Should I Do If the Lane Positioning Assist Light Comes On in My Peugeot 3008?

If the Lane Positioning Assist light is on steadily, it means the system is active and functioning properly. You can rely on the system to help maintain your vehicle’s position within the lane. Always remain attentive and keep your hands on the steering wheel, as the system is designed to assist, not replace, your control of the vehicle. For more detailed information, refer to the Driving section of your vehicle’s manual. If you notice any issues or unexpected behavior from the system, contact a PEUGEOT Authorized Dealer or Authorized Service for assistance.

Peugeot 3008 Warning Lamps: Automatic Wiping

What Does Peugeot 3008 Automatic Wiping Warning Mean?

Illuminates steadily when automatic windscreen wiping is activated. This indicates that the system is ready to detect and clear any rain or moisture from the windscreen.

What Should I Do If the Automatic Wiping Light Comes On in My Peugeot 3008?

If the Automatic Wiping light is on steadily, it means that the system is active and will automatically manage the windscreen wipers based on the detected rain or moisture. You do not need to manually activate the wipers. Ensure that the wiper blades are in good condition for optimal performance. If you experience any issues with the system or the light behaves unexpectedly, consult a PEUGEOT Authorized Dealer or Authorized Service for assistance.

Direction Indicators 

What Does Peugeot 3008 Direction Indicators Warning Mean?

Flashes with an audible signal, indicating that the direction indicators (turn signals) are on.

What Should I Do If the Direction Indicators Light Comes On in My Peugeot 3008?

If the Direction Indicators light is flashing with an audible signal, it means your turn signals are active. This is a normal function used to indicate your intention to turn or change lanes. Ensure the indicators are used appropriately to signal your movements to other drivers. If the indicators do not function correctly or if the light behaves unexpectedly, check the indicator bulbs and fuses, and if needed, consult a PEUGEOT Authorized Dealer or Authorized Service for assistance.

Sidelamps

What Does Peugeot 3008 Sidelamps Warning Mean?

Illuminates steadily, indicating that the sidelamps are on.

What Should I Do If the Sidelamps Light Comes On in My Peugeot 3008?

If the Sidelamps light is on steadily, it means your vehicle’s sidelamps are activated. This is a normal function to provide additional visibility in low-light conditions or as required by traffic regulations. Ensure that the sidelamps are used appropriately, especially during dawn, dusk, or in poor visibility conditions. If you notice any issues with the sidelamps or the light behaves unexpectedly, check the bulbs and fuses. If further assistance is needed, contact a PEUGEOT Authorized Dealer or Authorized Service.

Dipped Beam Headlamps

What Does Peugeot 3008 Dipped Beam Headlamps Warning Mean?

Illuminates steadily, indicating that the dipped beam headlamps are on.

What Should I Do If the Dipped Beam Headlamps Light Comes On in My Peugeot 3008?

If the Dipped Beam Headlamps light is on steadily, it means your vehicle’s dipped beam headlamps are activated. This is a normal function for providing adequate road illumination at night or in low-light conditions without blinding oncoming traffic. Ensure that the headlamps are used appropriately during night driving or in poor visibility. If you notice any issues with the headlamps or the light behaves unexpectedly, check the bulbs and fuses. If further assistance is needed, consult a PEUGEOT Authorized Dealer or Authorized Service.

Automatic Headlamp Dipping

What Does Peugeot 3008 Automatic Headlamp Dipping Warning Mean?

Illuminates steadily when the function has been activated via the touch screen (Driving/Vehicle menu) and the lighting control stalk is in the “AUTO” position.

What Should I Do If the Automatic Headlamp Dipping Light Comes On in My Peugeot 3008?

If the Automatic Headlamp Dipping light is on steadily, it means that the system is active and ready to automatically dip the headlamps when it detects oncoming traffic or vehicles ahead, improving safety and visibility. Ensure the lighting control stalk is in the “AUTO” position to allow the system to function correctly. For more detailed information, refer to the visibility section of your vehicle’s manual. If you encounter any issues with the system or if the light behaves unexpectedly, consult a PEUGEOT Authorized Dealer or Authorized Service for assistance.

Main Beam Headlamps

What Does Peugeot 3008 Main Beam Headlamps Warning Mean?

Illuminates steadily. This indicates that the main beam headlamps are switched on.

What Should I Do If the Main Beam Headlamps Warning Light Comes On in My Peugeot 3008?

If you notice this warning light, it simply means that your main beam headlamps are activated. There is no immediate action required if you have intentionally turned on the main beams for better visibility. However, if the main beams are on unintentionally, consider switching to dipped beams to avoid dazzling other drivers.

Foot On The Brake

What Does Peugeot 3008 Foot on the Brake Warning Mean?

Illuminates steadily. This warning indicates that there is insufficient or no pressure on the brake pedal. It typically appears in vehicles with an automatic gearbox when the engine is running and the vehicle is in position P (Park), signaling that the brake pedal needs to be pressed before the parking brake can be released and the vehicle can be moved out of the Park position.

What Should I Do If the Foot on the Brake Warning Light Comes On in My Peugeot 3008?

When this warning light illuminates, it means that the brake pedal is not being pressed with enough pressure, or at all, which is necessary for certain operations. In vehicles with an automatic gearbox, this warning is particularly important as it ensures that the vehicle remains stationary when in Park.

To address this warning, firmly press down on the brake pedal. Ensure that you maintain adequate pressure on the pedal to safely release the parking brake and move the gear selector out of the Park position. This is crucial to prevent the vehicle from rolling unexpectedly and to ensure it can be operated safely. If the warning persists despite adequate pressure, it may indicate an issue with the brake system that requires inspection by a PEUGEOT Authorized Dealer or Authorized Service. Always prioritize safety by ensuring that the brake system is functioning correctly before driving.

eSave Function

What Does Peugeot 3008 eSave Function (Rechargeable Hybrid) Warning Mean?

Illuminates steadily, accompanied by the reserved electric range display. This indicates that the eSave function is activated.

What Should I Do If the eSave Function Warning Light Comes On in My Peugeot 3008?

If this warning light is on, it means the eSave function is preserving electric energy for later use. This is normal operation for a rechargeable hybrid vehicle. No immediate action is required. You can continue driving as usual, knowing that the vehicle is managing its electric range efficiently for future use when needed.

In conclusion, being familiar with the Peugeot 3008 Warning Lamps can significantly enhance your driving experience and ensure your vehicle operates at its best. Each warning light serves as a communication tool, helping you address any issues promptly and efficiently.

For more comprehensive insights into the Peugeot 3008, check out our detailed Peugeot 3008 Review where we delve into its features, performance, and overall value. Additionally, if you own a plug-in hybrid engine version of the Peugeot 3008, our Peugeot 3008 Plug-in Hybrid Engine and Performance Review offers an in-depth analysis of its engine performance and efficiency. Stay informed and keep your Peugeot 3008 in top condition by understanding these crucial indicators and taking appropriate actions when necessary.

Check our Instagram for more!