Peugeot 3008 Indicators: Red Warnings

Welcome to our Peugeot 3008 Indicators review. Owning a Peugeot 3008 offers a blend of performance, style, and advanced technology. However, like any modern vehicle, the Peugeot 3008 is equipped with a range of warning and indicator lamps designed to keep you informed about the car’s status and ensure your safety. Understanding these warning lights and knowing how to respond can prevent minor issues from becoming major problems and keep your driving experience smooth and safe. In this blog, we’ll explore the various warning and indicator lamps you might encounter in your Peugeot 3008, explaining what each one means and the steps you should take when they light up.

Peugeot 3008 Indicators: STOP Warning

What Does Peugeot 3008 Stop Warning Mean?

The STOP warning light illuminates steadily, accompanied by an audible signal, a message on the display, and another warning lamp. This indicates a serious fault or major electrical issue has been detected in the engine, braking system, power steering system, or automatic transmission.

What Should I Do If the Stop Warning Light Comes On in My Peugeot 3008?

If you are driving and in a position to stop, slow down. Pull over to the side safely, avoiding high speeds. You must stop the vehicle immediately. Turn off the ignition as soon as it is safe to do so. Contact a PEUGEOT Authorized Dealer or Authorized Service for assistance.

Maximum Coolant Temperature

What Does the Maximum Coolant Temperature Warning Mean in My Peugeot 3008?

The Maximum Coolant Temperature warning light illuminates steadily, indicating that the temperature of the cooling system is too high. This warning signals that the engine’s cooling system is overheating and requires immediate attention to prevent potential damage.

What Should I Do If the Maximum Coolant Temperature Warning Light Comes On in My Peugeot 3008?

If you notice the Maximum Coolant Temperature warning light while driving, you should take immediate action. Begin by reducing your speed and finding a safe place to pull over. Once stopped, turn off the engine and allow it to cool down. It’s crucial to avoid opening the coolant reservoir cap while the engine is still hot, as this can cause burns or other injuries.

After allowing the engine to cool, check the coolant level and top it up if necessary. Be sure to use the appropriate coolant recommended for your Peugeot 3008. If the warning light persists even after topping up the coolant, it’s essential to contact a PEUGEOT Authorized Dealer or Authorized Service to have the cooling system inspected and repaired as needed.

Engine Oil Pressure

What Does the Engine Oil Pressure Warning Mean?

The Engine Oil Pressure warning light illuminates steadily, indicating a fault within the engine’s lubrication system. This warning signifies that the engine oil pressure is too low, which can lead to serious engine damage if not addressed promptly.

What Should I Do If the Engine Oil Pressure Warning Light Comes On in My Peugeot 3008?

If the Engine Oil Pressure warning light comes on while driving, it is crucial to take immediate action. Begin by slowing down and finding a safe place to pull over. Once you have stopped the vehicle, turn off the engine to prevent further damage.

After turning off the engine, wait a few minutes to allow the oil to settle, then check the oil level using the dipstick. If the oil level is low, top it up with the recommended engine oil for your Peugeot 3008.

If the warning light remains on even after topping up the oil, do not attempt to drive the vehicle further. Contact a PEUGEOT Authorized Dealer or Authorized Service to have the lubrication system inspected and repaired to avoid potential engine damage.

Traction Battery Overheating (Hybrid or Rechargeable Hybrid)

What Does the Traction Battery Overheating Warning Mean?

The Traction Battery Overheating warning light illuminates steadily, often combined with the STOP warning lamp, an audible signal, and a displayed message. This warning indicates that the temperature of the traction battery in your hybrid or rechargeable hybrid vehicle is too high, which can pose a serious safety risk.

What Should I Do If the Traction Battery Overheating Warning Light Comes On in My Peugeot 3008?

If you see the Traction Battery Overheating warning light while driving, it is crucial to act immediately. Begin by finding a safe place to pull over and stop the vehicle as soon as possible. Once you have safely stopped, turn off the ignition.

Due to the potential danger associated with an overheating battery, evacuate the vehicle promptly and move to a safe distance away from it. Do not attempt to open the hood or inspect the battery yourself, as this could be hazardous.

Contact emergency services if necessary, and then reach out to a PEUGEOT Authorized Dealer or Authorized Service for professional assistance. They will be able to inspect and address the issue safely and effectively.

Traction Battery Malfunction (Hybrid or Rechargeable Hybrid)

What Does the Traction Battery Malfunction Warning Mean?

The Traction Battery Malfunction warning light illuminates steadily, often combined with the Service warning lamp and a displayed message. This warning indicates that there is a fault in the traction battery of your hybrid or rechargeable hybrid vehicle.

What Should I Do If the Traction Battery Malfunction Warning Light Comes On in My Peugeot 3008?

If the Traction Battery Malfunction warning light comes on while you are driving, it is important to address the issue as soon as possible. Begin by finding a safe location to pull over and stop the vehicle.

Once you have safely stopped, turn off the ignition and avoid using the vehicle until the fault has been diagnosed and repaired. Contact a PEUGEOT Authorized Dealer or Authorized Service for professional assistance. They will perform a thorough inspection of the traction battery to determine the cause of the malfunction and carry out the necessary repairs.

Driving with a malfunctioning traction battery can affect the performance and safety of your vehicle, so it is crucial to seek professional help immediately.

System Malfunction Warning

What Does the System Malfunction Warning Mean?

The System Malfunction warning light illuminates steadily in hybrid or rechargeable hybrid vehicles, indicating a fault within the hybrid system. This warning alerts you to a problem that could affect the vehicle’s performance and efficiency.

What Should I Do If the System Malfunction Warning Light Comes On in My Peugeot 3008?

If the System Malfunction warning light comes on while you are driving, take immediate action. Begin by slowing down and finding a safe place to pull over. Once you have safely stopped the vehicle, turn off the ignition.

After stopping the vehicle, allow it to rest for a few minutes. Sometimes, a simple restart can temporarily reset the system. If the warning light remains on after restarting the vehicle, do not continue driving.

Contact a PEUGEOT Authorized Dealer or Authorized Service for assistance. They will perform a detailed diagnostic check to identify and repair the fault within the hybrid system. Continuing to drive with a malfunctioning hybrid system can lead to further complications and potential safety issues, so it is essential to seek professional help promptly.

Cable Connected (Rechargeable Hybrid)

What Does the Cable Connected Warning Mean?

The Cable Connected warning light illuminates steadily when the ignition is switched on in a rechargeable hybrid vehicle. This warning indicates that the charging cable is still connected to the vehicle’s connector, preventing the vehicle from starting.

What Should I Do If the Cable Connected Warning Light Comes On in My Peugeot 3008?

If the Cable Connected warning light comes on while you are trying to start your vehicle, it means that the charging cable is still plugged in. To resolve this issue, follow these steps:

1. Ensure the vehicle is turned off and securely parked.
2. Go to the charging port and carefully disconnect the charging cable from the vehicle’s connector.
3. Close the charging port flap securely to prevent any dirt or moisture from entering.
4. Once the charging cable is disconnected and the flap is closed, return to the driver’s seat and start the vehicle as usual.

This warning is a safety feature designed to prevent driving while the vehicle is still connected to a power source. Always make sure to disconnect the charging cable before attempting to start your vehicle.

12 V Battery Charge

What Does the 12V Battery Charge Warning Mean?

The 12V Battery Charge warning light illuminates steadily, indicating a fault in the battery charging circuit. This could be due to dirty terminals, a loose or severed alternator belt, or another issue preventing the battery from charging properly.

What Should I Do If the 12V Battery Charge Warning Light Comes On in My Peugeot 3008?

If the 12V Battery Charge warning light comes on while you are driving, it is important to address the issue promptly. Here are the steps to follow:

1. Pull Over Safely: Slow down and find a safe place to pull over and stop the vehicle.
2. Check the Electric Parking Brake: If the electric parking brake stops working, immobilize the vehicle.
   • If you have a manual gearbox, engage a gear.
   • If you have an automatic gearbox, place chocks against one of the wheels to prevent the vehicle from moving.
3. Inspect and Clean the Terminals: Open the hood and locate the battery terminals. Ensure they are clean and tight. Use a battery terminal cleaner or a wire brush to remove any corrosion, and then tighten the connections securely.
4. Restart the Engine: Once the terminals are cleaned and tightened, restart the engine. If the warning light remains on, further action is required.
5. Seek Professional Help: If the warning light does not go off after cleaning and tightening the terminals, contact a PEUGEOT Authorized Dealer or Authorized Service. They will inspect the battery charging circuit and repair any faults, such as replacing a damaged alternator belt.

Addressing the 12V Battery Charge warning promptly helps ensure your vehicle’s electrical system functions properly and prevents potential breakdowns.

Door(s) Open

What Does the Door(s) Open Warning Mean?

The Door(s) Open warning light illuminates steadily, often accompanied by a message identifying the specific door or boot that is not properly closed. Additionally, an audible signal will sound if the vehicle’s speed exceeds 6 mph (10 km/h). This warning alerts you to a door or boot that is not securely closed.

What Should I Do If the Door(s) Open Warning Light Comes On in My Peugeot 3008?

If the Door(s) Open warning light comes on while you are driving, it is important to address the issue immediately to ensure the safety of all passengers and prevent any damage. Follow these steps:

1. Slow Down Safely: Reduce your speed and find a safe place to pull over.
2. Check All Doors and Boot: Once you have stopped the vehicle, check all doors and the boot to ensure they are securely closed. Open and close each door and the boot firmly to make sure they latch properly.
3. Restart the Vehicle: After ensuring all doors and the boot are properly closed, restart the vehicle. The warning light should turn off if the issue is resolved.

If the warning light remains on after checking and closing all doors and the boot, there may be a problem with the door sensors or latches. In this case, it is advisable to contact a PEUGEOT Authorized Dealer or Authorized Service for a thorough inspection and repair.

Ensuring all doors and the boot are properly closed is crucial for the safety and security of your vehicle and its occupants.

Seat Belts Not Fastened/Unfastened

What Does the Seat Belts Not Fastened/Unfastened Warning Mean?

The Seat Belts Not Fastened/Unfastened warning light illuminates or flashes, accompanied by an increasing audible signal. This warning indicates that a seat belt has not been fastened or has been unfastened, alerting the driver and passengers to buckle up.

What Should I Do If the Seat Belts Not Fastened/Unfastened Warning Light Comes On in My Peugeot 3008?

If the Seat Belts Not Fastened/Unfastened warning light comes on while you are driving, it is important to take immediate action to ensure the safety of all occupants. Follow these steps:

1. Pull Over Safely: If you are already driving, find a safe place to pull over and stop the vehicle.
2. Check Seat Belts: Ensure that all passengers have their seat belts fastened securely. Check each seat belt by pulling it to see if it is locked in place. If a seat belt is unfastened, instruct the passenger to buckle it properly.
3. Restart the Vehicle: After ensuring all seat belts are fastened, continue driving. The warning light and audible signal should turn off once all seat belts are securely fastened.
4. Address Any Issues: If the warning light remains on or continues to flash despite all seat belts being fastened, there may be a problem with the seat belt sensors. In this case, contact a PEUGEOT Authorized Dealer or Authorized Service for inspection and repair.

Ensuring that all seat belts are fastened is crucial for the safety of all occupants in the vehicle. Always make sure everyone is buckled up before driving.

Electric Parking Brake

What Does the Electric Parking Brake Warning Mean?

The Electric Parking Brake warning light can illuminate in two ways:

Fixed Light: Indicates that the electric parking brake is applied.

Flashing Light: Indicates a fault in the application or release of the electric parking brake.

What Should I Do If the Electric Parking Brake Warning Light Comes On in My Peugeot 3008?

Fixed Warning Light

If the Electric Parking Brake warning light is fixed, it means the brake is applied. This is normal when you have engaged the parking brake.

1. Check Application: Before driving, ensure the parking brake is released by pressing the brake pedal and switching off the parking brake.

Flashing Warning Light

If the warning light is flashing, there is a fault in the electric parking brake system. Take the following steps:

1. Park Safely: Find a safe and level place to pull over and stop the vehicle.
   • If you have a manual gearbox, engage a gear.
   • If you have an automatic gearbox, select mode P.
2. Switch Off the Ignition: Turn off the vehicle’s ignition to reset the system. Wait a few moments before restarting the vehicle.
3. Check for Continued Issues: After restarting, if the warning light remains flashing, do not drive the vehicle.
4. Seek Professional Help: Contact a PEUGEOT Authorized Dealer or Authorized Service for inspection and repair of the electric parking brake system.

Addressing issues with the electric parking brake promptly ensures the safety and proper functioning of your vehicle.

Braking

What Does the Braking Warning Mean?

The Braking warning light can illuminate for two primary reasons:

Fixed Light (Brake Fluid Level): Indicates that the brake fluid level in the braking circuit has dropped significantly.

Fixed Light (EBFD System): Indicates a fault in the Electronic Brake Force Distribution (EBFD) system.

What Should I Do If the Braking Warning Light Comes On in My Peugeot 3008?

Brake Fluid Level Low

If the Braking warning light is fixed due to a low brake fluid level, follow these steps:

1. Park Safely: Slow down and find a safe place to pull over and stop the vehicle.
2. Check Brake Fluid Level: Open the hood and locate the brake fluid reservoir. Check the fluid level against the minimum and maximum marks.
3. Top Up Brake Fluid: If the fluid level is low, top it up with brake fluid that complies with the manufacturer’s recommendations. Be careful not to overfill.
4. Restart the Vehicle: After topping up, restart the vehicle. If the warning light turns off, the issue is resolved.
5. Persistent Issue: If the warning light remains on even after topping up the brake fluid, there may be a leak or another issue. Contact a PEUGEOT Authorized Dealer or Authorized Service for inspection and repair.

EBFD System Faulty

If the Braking warning light is fixed due to a fault in the EBFD system, take the following steps:

1. Park Safely: Find a safe place to pull over and stop the vehicle.
2. Switch Off the Ignition: Turn off the vehicle’s ignition to reset the system. Wait a few moments before restarting the vehicle.
3. Check for Continued Issues: After restarting, if the warning light remains on, do not continue driving.
4. Seek Professional Help: Contact a PEUGEOT Authorized Dealer or Authorized Service. The EBFD system is crucial for balanced braking performance and requires professional inspection and repair.

Addressing braking issues promptly ensures the safety and reliability of your vehicle.

Staying informed about the warning and indicator lamps in your Peugeot 3008 is crucial for maintaining your vehicle’s health and ensuring a safe driving experience. By understanding the meanings behind these warnings and knowing the appropriate actions to take, you can address issues promptly and effectively. Always remember that your vehicle’s warning lights are there to alert you to potential problems, and timely attention can save you from more extensive repairs down the line. If you’re ever in doubt or unable to resolve an issue yourself, don’t hesitate to contact a PEUGEOT Authorized Dealer or Authorized Service for professional assistance. Drive safely and enjoy the journey with confidence in your well-maintained Peugeot 3008.

In conclusion, staying informed about the warning and indicator lamps in your Peugeot 3008 is crucial for maintaining your vehicle’s health and ensuring a safe driving experience. By understanding the meanings behind these warnings and knowing the appropriate actions to take, you can address issues promptly and effectively. Always remember that your vehicle’s warning lights are there to alert you to potential problems, and timely attention can save you from more extensive repairs down the line.

If you’re interested in a more comprehensive overview of the Peugeot 3008, check out our detailed Peugeot 3008 review. For those with the petrol version of this model, our Peugeot 3008 petrol engine review provides in-depth insights into its performance and specifications. Don’t hesitate to explore these resources to get the most out of your Peugeot 3008. Drive safely and enjoy the journey with confidence in your well-maintained vehicle.

Check our Instagram for more!