Peugeot 508 Warning Lamps: Blue and Green Warnings

Welcome to our Peugeot 508 Warning Lamps review. In this guide, we’ll provide you with clear and simple explanations for the various warning lamps you might encounter in your Peugeot 508. Understanding these indicators can help you maintain your vehicle’s performance and safety, ensuring a smooth and worry-free driving experience. Whether it’s the Stop & Start warning or the advanced Night Vision system, we’ve got you covered with straightforward advice and practical tips.

Peugeot 508 Warning Lamps: Stop & Start Warning

What Does Peugeot 508 Stop & Start Warning Mean?

Illuminates steadily when the vehicle stops, indicating the Stop & Start system has put the engine into STOP mode. If it flashes temporarily, it means STOP mode is momentarily unavailable or START mode is automatically triggered.

What Should I Do If the Stop & Start Warning Light Comes On in My Peugeot 508?

If you notice the Stop & Start warning light while driving, refer to the Driving section of your vehicle’s manual for more detailed instructions. Generally, it is an indication that the system is either engaging or temporarily unable to engage. If the light continues to flash or you experience issues, contact a PEUGEOT Authorized Dealer or Authorized Service for assistance.

Vehicle Ready To Drive (Rechargeable hybrid)

What Does Peugeot 508 Vehicle Ready to Drive Warning Mean? (Rechargeable Hybrid)

Illuminates steadily with an audible signal when the vehicle is ready to drive. The indicator lamp goes out upon reaching a speed of approximately 3 mph (5 km/h) and lights up again when the vehicle stops moving. The lamp will go out when you switch off the motor and exit the vehicle.

What Should I Do If the Vehicle Ready to Drive Light Comes On in My Peugeot 508?

When you see this warning light, it means your vehicle is ready to be driven. There’s no need for concern; simply proceed with your journey. The light will turn off once you start moving and reach a speed of about 3 mph (5 km/h). If you stop, the light will come on again, and it will turn off completely when you switch off the motor and exit the vehicle. If you notice any irregularities or if the light behaves unexpectedly, consult the Driving section of your manual or contact a PEUGEOT Authorized Dealer or Authorized Service for further assistance.

Lane Positioning Assist

What Does Peugeot 508 Lane Positioning Assist Warning Mean?

Illuminates steadily to indicate that the Lane Positioning Assist function has been activated and all conditions for its operation have been met. This system helps keep your vehicle centered within its lane by providing steering assistance.

What Should I Do If the Lane Positioning Assist Light Comes On in My Peugeot 508?

When you see the Lane Positioning Assist warning light, it means the system is actively working to help you maintain your lane position. This is a normal function and indicates that the system is monitoring the lane markings and providing necessary steering inputs. If you feel the vehicle gently steering itself, this is the system keeping you centered in your lane. Always keep your hands on the wheel and be prepared to take control if needed.

For more detailed information on how to use and get the most out of this feature, refer to the Driving section of your vehicle’s manual. If the light remains on without the system functioning correctly, or if you experience any issues with the lane positioning, contact a PEUGEOT Authorized Dealer or Authorized Service for further assistance.

Peugeot 508 Warning Lamps: Automatic Wiping

What Does Peugeot 508 Automatic Wiping Warning Mean?

Illuminates steadily to indicate that the automatic windscreen wiping function is activated. This feature detects rain on the windscreen and automatically adjusts the wiper speed to maintain clear visibility.

What Should I Do If the Automatic Wiping Light Comes On in My Peugeot 508?

When the Automatic Wiping warning light is on, it means your vehicle’s rain sensor has detected moisture on the windscreen, and the automatic wiper system is active. This system is designed to ensure optimal visibility by adjusting the wiper speed according to the intensity of the rain.

There is no immediate action required on your part, as the system will handle the wiping automatically. However, you should ensure that the sensor area is clean and unobstructed for accurate detection. If you notice that the wipers are not responding correctly to the rain conditions or if the warning light remains on without apparent rain, it may indicate a malfunction. In such cases, refer to the Driving section of your vehicle’s manual for more information and contact a PEUGEOT Authorized Dealer or Authorized Service if the issue persists.

Night Vision

What Does Peugeot 508 Night Vision Warning Mean?

Fixed (grey): Indicates that the Night Vision function is activated but not currently available. This can occur under certain conditions where the system cannot operate effectively.

Fixed: Indicates that the Night Vision function is active and all conditions for its operation are met. The system is currently providing enhanced visibility in low-light conditions by detecting and highlighting pedestrians or animals on the road ahead.

What Should I Do If the Night Vision Light Comes On in My Peugeot 508?

When you see the grey Night Vision warning light, it means that the system is turned on but cannot operate under the current conditions. This might happen in situations with insufficient contrast or if the camera lens is obstructed. Ensure that the camera lens is clean and free from obstructions, and check the vehicle’s manual for any specific conditions that might affect the system’s availability.

If the Night Vision light is illuminated steadily, it means the system is actively working to enhance your visibility. This feature uses infrared technology to detect and highlight potential hazards beyond the range of your headlights, improving your safety while driving at night.

For more detailed information on how to utilize the Night Vision feature and understand its operational conditions, refer to the Lighting and Visibility section of your vehicle’s manual. If you experience any issues with the system or if the warning light behaves unexpectedly, contact a PEUGEOT Authorized Dealer or Authorized Service for further assistance.

Direction Indicators

What Does Peugeot 508 Direction Indicators Warning Mean?

Flashing with audible signal: This indicates that the direction indicators (turn signals) are active. The flashing light and audible signal notify you and other drivers that you intend to turn or change lanes.

What Should I Do If the Direction Indicators Light Comes On in My Peugeot 508?

When you see the direction indicators warning light flashing, it means your turn signals are in use. Ensure you use your turn signals appropriately to indicate your intentions on the road, enhancing safety for you and other drivers. If the indicator light does not flash or the audible signal is not heard, it might indicate a malfunction in the indicator system. In such cases, check the indicator bulbs and consult a PEUGEOT Authorized Dealer or Authorized Service if the issue persists.

Sidelamps Warning

What Does Peugeot 508 Sidelamps Warning Mean?

Fixed: Indicates that the sidelamps are on. Sidelamps, also known as parking lights, are used to make your vehicle more visible in low-light conditions without the full brightness of the headlights.

What Should I Do If the Sidelamps Light Comes On in My Peugeot 508?

When the sidelamps warning light is illuminated steadily, it means your sidelamps are currently active. This is normal and helps increase the visibility of your vehicle, especially when parked or in dim lighting. Ensure to turn off the sidelamps when they are no longer needed to prevent battery drain. If you notice any issues with the sidelamps or if they fail to turn on, consult the Lighting and Visibility section of your vehicle’s manual or contact a PEUGEOT Authorized Dealer or Authorized Service.

Dipped Beam Headlamps

What Does Peugeot 508 Dipped Beam Headlamps Warning Mean?

Fixed: Indicates that the dipped beam headlamps are on. These headlamps provide adequate road illumination without blinding other drivers and are typically used during night driving or in poor weather conditions.

What Should I Do If the Dipped Beam Headlamps Light Comes On in My Peugeot 508?

When the dipped beam headlamps warning light is steadily illuminated, it signifies that your dipped beam headlamps are active. This is standard operation for driving in low visibility conditions. Ensure your headlamps are properly aligned and functioning. If you experience any issues with the dipped beam headlamps, such as failure to turn on or irregular lighting, refer to the Lighting and Visibility section of your vehicle’s manual or seek assistance from a PEUGEOT Authorized Dealer or Authorized Service.

Peugeot Matrix LED Technology 2.0

What Does Peugeot 508 Matrix LED Technology 2.0 Warning Mean?

Fixed: This indicates that the Matrix LED Technology 2.0 function is active and all conditions for its operation are met. The system is designed to provide optimal lighting by adjusting the beam pattern automatically to enhance visibility while preventing glare for oncoming drivers.

Off, accompanied by a message and an audible signal: This indicates that there is a fault with the Matrix LED Technology 2.0 function. The system has detected an issue and is unable to operate correctly.

Off, accompanied by the display of a message: This indicates that the sensor for the Matrix LED Technology 2.0 is masked, meaning it is obstructed and unable to function properly.

What Should I Do If the Matrix LED Technology 2.0 Light Comes On in My Peugeot 508?

When the Matrix LED Technology 2.0 warning light is fixed, it means the system is functioning normally, providing you with advanced lighting technology that adjusts the beam pattern for optimal visibility. This is a normal operation, and no immediate action is required.

If the warning light is off and accompanied by a message and an audible signal, it indicates a fault within the system. In this case, follow these steps:

1. Refer to the message displayed for specific instructions.
2. If the fault persists, it is advised to contact a PEUGEOT Authorized Dealer or Authorized Service for a thorough inspection and repair.

If the warning light is off and accompanied by the display of a message indicating the sensor is masked, follow these steps:

1. Stop the vehicle as soon as it is safe to do so and switch off the ignition.
2. Inspect the front camera located near the windscreen or grille and clean it to remove any dirt, debris, or obstructions.
3. Restart the vehicle to check if the system resumes normal operation.

For more detailed information on the Matrix LED Technology 2.0 and its functions, refer to the Lighting and Visibility section of your vehicle’s manual. If any issues persist, contact a PEUGEOT Authorized Dealer or Authorized Service for further assistance.

Main Beam Headlamps

What Does Peugeot 508 Main Beam Headlamps Warning Mean?

Fixed: Indicates that the main beam headlamps are on. These headlamps provide maximum road illumination, ideal for night driving on poorly lit roads or highways.

What Should I Do If the Main Beam Headlamps Light Comes On in My Peugeot 508?

When the main beam headlamps warning light is illuminated steadily, it signifies that your main beam headlamps are currently active. This is standard for situations requiring enhanced visibility, such as driving at night on dark roads or in low-visibility conditions.

Ensure to switch back to dipped beams when approaching oncoming traffic or when driving behind another vehicle to avoid dazzling other drivers. If you encounter any issues with your main beam headlamps, such as failure to switch on or inconsistent lighting, refer to the Lighting and Visibility section of your vehicle’s manual for troubleshooting steps. For persistent issues, contact a PEUGEOT Authorized Dealer or Authorized Service for professional assistance.

Foot On The Brake Warning

What Does Peugeot 508 Foot on the Brake Warning Mean?

Fixed: This indicates that there is insufficient or no pressure on the brake pedal. This warning typically appears when the engine is running and you need to press the brake pedal before releasing the parking brake or moving out of mode P (Park) on an automatic gearbox.

What Should I Do If the Foot on the Brake Light Comes On in My Peugeot 508?

When the Foot on the Brake warning light is illuminated steadily, it means you need to apply pressure to the brake pedal. This is necessary in several situations:

Before releasing the parking brake: Ensure you press down firmly on the brake pedal before attempting to release the parking brake.

To move out of mode P (Park) on an automatic gearbox: Press the brake pedal firmly to shift from Park to Drive or Reverse.

This warning helps ensure that the vehicle does not move unintentionally, enhancing safety during start-up and gear changes. If the light remains on despite sufficient pressure on the brake pedal, or if you experience difficulties with the brake system, refer to the Driving section of your vehicle’s manual for further guidance. For any persistent issues, contact a PEUGEOT Authorized Dealer or Authorized Service for professional assistance.

e-SAVE Function (Rechargeable hybrid)

What Does Peugeot 508 e-SAVE Function Warning Mean? (Rechargeable Hybrid)

Fixed, accompanied by the reserved electric range: This indicates that the e-SAVE function is activated. The e-SAVE function reserves a certain amount of electric range to be used later, ensuring you have electric power available when you need it most.

What Should I Do If the e-SAVE Function Light Comes On in My Peugeot 508?

When the e-SAVE function warning light is illuminated steadily, it signifies that the system is reserving a portion of your vehicle’s electric range for future use. This feature is particularly useful if you anticipate needing electric power later in your journey, such as for city driving or areas with low-emission zones.

Here’s what you should do:

1. Keep an eye on the display showing the reserved electric range to understand how much electric power is being saved.
2. Use the reserved electric power efficiently by planning your route and driving habits to maximize the benefits of the e-SAVE function.

For more detailed information on how to manage and utilize the e-SAVE function, refer to the specific sections about hybrid driving in your vehicle’s manual. If you encounter any issues with the e-SAVE system or if the warning light behaves unexpectedly, contact a PEUGEOT Authorized Dealer or Authorized Service for further assistance.

In conclusion, familiarizing yourself with the Peugeot 508 Warning Lamps can significantly enhance your driving experience and ensure your vehicle’s optimal performance. Each warning light serves a specific purpose, from indicating the readiness of your hybrid vehicle to alerting you about the activation of safety features like Lane Positioning Assist. Understanding these indicators and knowing the appropriate actions to take can help you address issues promptly and maintain your vehicle’s safety and efficiency.

For more in-depth information about the Peugeot 508, we invite you to read our comprehensive Peugeot 508 Review. This article covers everything you need to know about the car’s features, performance, and overall driving experience.

If you own a plug-in hybrid version of the Peugeot 508 and want to learn more about its engine, check out our detailed Peugeot 508 Plug-In Hybrid Engine and Performance Review. This resource provides valuable insights into the plug-in hybrid engine’s performance and maintenance tips to keep it running smoothly.

By staying informed and proactive, you can enjoy all the benefits of your Peugeot 508 while ensuring a safe and enjoyable journey.

Check our Instagram for more!